Bathroom retiling in Kuwait

Fresh bathroom tiling built to last

Old tiles stripped, floor-to-wall junctions properly waterproofed, and new porcelain or marble laid to handle humidity and heat.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates
What the work covers - Bathroom retiling

What the work covers

Old tile removal, surface preparation, waterproofing and full retiling with quality materials.

  • Old tile removal

    Breaking out old tiles and adhesive bed without damaging the substrate.

  • Screed levelling

    Correcting floor slope toward the drain and levelling walls before tiling.

  • Junction waterproofing

    Applying waterproof membrane at floor edges and wall bases before tiling.

  • Floor and wall tiling

    Laying ceramic, porcelain or marble with precise alignment and level.

  • Grout and silicone

    Filling joints and sealing movement junctions with mould-resistant silicone.

  • Drain refitting

    Refitting the drain cover and trap flush with the finished tile surface.

Signs your bathroom tiles need replacing

  1. Hollow or cracked tiles

    A hollow knock means lost adhesion; lifted tiles let water creep behind and cause damage.

  2. Crumbling or stained grout

    Eroded grout loses its water resistance and becomes a breeding ground for mould in humid conditions.

  3. Damp on the adjoining wall

    Visible damp patches on the next room's wall point to water passing through the tile layer.

  4. Old ceramic that cannot be cleaned

    Tiles that hold stains despite repeated scrubbing have usually lost their glaze and cannot be restored.

Materials and methods used

  1. Liquid waterproof membrane

    Brushed onto the substrate and junctions before tiling to block any water path behind the new tiles.

  2. Moisture-resistant adhesive

    Flexible wet-area adhesive rated for thermal movement in Kuwait's high summer temperatures.

  3. Large-format porcelain or marble

    Larger slabs reduce the number of grout lines and give a clean look that is easy to maintain daily.

  4. Epoxy grout for joints

    Resists stains, mould and strong cleaners far better than standard cement-based grout in wet conditions.

Part of: Bathroom renovation

More in bathroom renovation.

What goes wrong with most finishing.

The finish is what you see every day, and its mistakes do not hide. These three are the most common.

  1. 01

    A rushed finish

    The finish is what you live with every day. Rushing it shows in every corner.

  2. 02

    Four contractors for one finish

    Tiling, gypsum, paint and aluminium crews who never talk to each other.

  3. 03

    After-care that never comes

    Once you have the keys, it is hard to find anyone to come back and fix what shows up.

The solution?

Full finishing, and maintenance after it, from one licensed company.

  1. A bathroom finished in modern marble
    A rushed finish

    Turnkey finishing

    Marble, tiling, gypsum and paint from one company.

  2. A gypsum ceiling with hidden lighting in a modern living room
    Four contractors for one finish

    One company for every trade

    No gaps between the tiler, the gypsum crew and the painter.

  3. A finished modern living room with a marble floor
    After-care that never comes

    Regular maintenance after handover

    And finishing on instalments if you need it.

How it works.

  1. Contact and survey

    Call or WhatsApp us to arrange an on-site bathroom survey.

  2. Material selection

    We help you choose the tile, format, grout colour and finish.

  3. Strip and prepare

    Old tiles removed, substrate levelled and waterproof membrane applied.

  4. Tiling and grouting

    New tiles laid, joints grouted and movement junctions sealed with silicone.

  5. Inspection and handover

    Slopes, joints and finish checked before we hand the bathroom back clean.

Call now

What sets the price.

No fixed price list applies; these factors determine the final quote for each bathroom.

Get a quote
  1. Tiling area

    Total floor and wall area to be tiled drives material quantities and labour hours.

  2. Tile material chosen

    Marble or large-format porcelain costs more to supply and lay than standard ceramic.

  3. Demolition scope

    Multiple layers of old tiles to remove add time and labour to the overall cost.

  4. Substrate condition

    An uneven or damaged substrate needs remedial screeding before any tiling can begin.

  5. Drainage works

    Relocating the drain or replacing the trap adds cost alongside the tiling work.

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Bathroom retiling in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.

Official references: Kuwait Fire Force (safety requirements in finishing work)

Questions, answered.

Call now
What is the difference between full retiling and a tile overlay in a bathroom?

Full retiling removes the old tiles, repairs the substrate and applies a fresh waterproof membrane, addressing any hidden damage. A tile overlay keeps the original tiles in place but gives no access to the substrate and cannot fix an existing leak or a failed waterproofing layer.

Does waterproofing need to cover the full wall height or just the floor?

The full floor area and a band of at least 20 cm up the walls must be waterproofed, with full coverage inside the shower zone. This prevents water spray from migrating into adjacent walls over time.

Is epoxy grout necessary in Kuwaiti bathrooms or does cement grout suffice?

Epoxy grout is strongly recommended in wet areas because it does not absorb moisture, does not crack under thermal movement and resists mould far better than cement grout. Cement grout remains an option in dry zones but deteriorates quickly in bathroom conditions.

How can I check that the bathroom floor slope is correct after retiling?

Pour a cup of water at the centre of the floor; it should flow steadily toward the drain without pooling. We check and set the correct slope during the screeding stage, before any tile is laid.

Can the tile colour be changed without changing the tile format or size?

Yes, a different colour in the same size is straightforward to specify. Changing the format size affects the starting point and joint layout and requires re-planning the installation, so confirm the tile size before ordering to avoid waste.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works