What the installation covers
Wall opening and pipe connection through to a full running test at handover
Supply line check
Confirm hot and cold rough-in branches exist and hold working pressure
Mixer or head connection
Connect mixer body or fixed head to branches with rated sealing rings
Drain line connection
Fit floor trap with correct fall toward the main drain line
Plate and bracket fixing
Anchor wall plate and brackets using chemical fixings where the wall requires
Silicone sealing
Seal every wall penetration and trap rim with neutral-cure sanitary silicone
Operational test
Run hot and cold flow, confirm drain speed, check every joint for drips
Signs you need a new shower fitted
No shower point exists
The bathroom has a mixer but no shower head outlet or dedicated floor trap
Damp patch on the bathroom wall
A damp stain appears behind the shower position after use, pointing to a loose supply joint
Water pools on the floor
Water collects on the floor because the old trap was set without adequate fall
Old shower head damaged
Scale from Kuwait's hard water has corroded the head or mixer body beyond cleaning
Before you call us
Fix the installation position
Choose the wall or corner so the technician can judge the hidden pipe route
Know your wall material
Block, concrete or gypsum wall decides the anchor type needed for the shower plate
Have your chosen shower ready
Have the mixer and shower head on site before the visit to avoid delays
Check your water pressure
Rain-head showers need adequate pressure; tell us if pressure is already weak
More in sanitary fixture installation.
What goes wrong with most plumbing.
Plumbing problems start hidden and end with breaking tiles. These three cost the most.
01Pipes laid in a rush
Pipework rushed before the walls close stays hidden until it starts to leak.
02Leaks you cannot see
A slow leak behind tiles shows up as damp, stains and a higher water bill.
03Nobody answers in an emergency
A burst pipe at night cannot wait for a contractor who has moved on.
The solution?
Pipework, leak detection and maintenance from one licensed company.
Pipes laid in a rushFirst-fix plumbing by the builder
Laid as part of the build, before the walls close.
Leaks you cannot seeWater leak detection
We find the source first.
Nobody answers in an emergency24-hour emergency plumber
Plus regular maintenance contracts after handover.
How it works.
Call or whatsApp
Tell us the shower type, bathroom location and wall material
Site inspection
Technician checks hidden pipe route, trap condition and water pressure
Quotation
You receive a clear scope and price before any work begins
Installation
Pipes connected, shower fitted, all joints and wall penetrations sealed
Test and handover
Full run to confirm pressure, drain speed and seal integrity before handover
What sets the price.
Quote figures depend on site conditions that only a visit can confirm accurately
Get a quoteShower type and model
Fixed head, thermostatic mixer or rain head each carry different fitting effort
Existing supply rough-in
Ready hot and cold branches reduce time and cost noticeably
Breaking and reinstatement
Routing new pipes inside the wall requires breaking and re-finishing the surface
Wall construction material
Concrete walls need longer drilling and fixing time compared to block walls
Floor trap condition
Replacing an old trap or creating a new one adds to the overall price
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
Shower installation in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Ministry of Electricity and Water (water and drainage connections)
Questions, answered.
Call nowCan a shower be installed in a bathroom that has no floor drain?
Yes, but it requires breaking the floor to run a new drain line and fit a trap with correct fall toward the main drain, then reinstating the tiles.
Why does scale block a shower head so quickly in Kuwait?
Kuwait's water is mineral-heavy, so calcium deposits clog the nozzles fast. Fitting a head with removable nozzles makes periodic de-scaling straightforward.
Can the shower position be moved without replacing all the plumbing?
It depends on the distance. A short move may only need the existing branches extended; a larger shift requires a new chase in the wall or floor.
How often does the silicone around the shower need replacing?
Daily use and cleaning agents degrade silicone over time. Once cracking, detachment or damp spots behind the wall appear, remove the old bead and reapply immediately.
Does Kuwait's summer heat affect the shower supply pipes?
Pipes buried in walls are reasonably protected, but exposed runs on roofs and light-wells can expand and loosen joints. Periodic inspection prevents early leaks.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps