What the first-fix covers
Dedicated cold and hot supply points plus drain branches for each apartment, isolated and tested.
Cold supply runs
PPR pipe from the apartment riser to every cold outlet point.
Insulated hot supply
PPR hot runs fully sleeved with closed-cell foam inside wall chases.
Drain branch layout
uPVC swept branches from each fixture point to the vertical stack.
Per-apartment isolation
Isolation valve per apartment so one unit can be shut off independently.
Stub-out heights and offsets
Every supply and drain stub set to fixture drawing dimensions before screed.
Pressure test and handover
Documented pressure test per apartment before plastering, with a route record.
Materials and methods used
PPR pipe with heat fusion
Heat-fused joints form a single-material bond that resists Kuwait's mineral-heavy water and scale build-up.
Closed-cell foam sleeve
Sleeving hot lines inside walls stops heat transfer to adjacent cold pipes in Kuwait's warm building fabric.
uPVC drain with solvent cement
Resistant to grease and soap residue, suited to long horizontal runs serving multiple apartment drain branches.
45-degree swept fittings
Maintain flow velocity and reduce fine-sand sediment build-up common in Kuwaiti apartment drain lines.
Common mistakes in apartment first-fix
Shared supply between units
Running two apartments off one unseparated line means any repair cuts water to both units at once.
Plastering before testing
A leak found after plastering means breaking finished walls and tiles to reach the faulty joint.
Insufficient drain pitch
Flat horizontal drain branches accumulate grease and soap residue quickly, causing repeated blockages across floors.
Unsleeved hot pipe in wall
Kuwait's summer heat accelerates expansion in bare hot pipes, stressing the points where they pass through block or concrete.
More in first-fix plumbing, new houses.
What goes wrong with most plumbing.
Plumbing problems start hidden and end with breaking tiles. These three cost the most.
01Pipes laid in a rush
Pipework rushed before the walls close stays hidden until it starts to leak.
02Leaks you cannot see
A slow leak behind tiles shows up as damp, stains and a higher water bill.
03Nobody answers in an emergency
A burst pipe at night cannot wait for a contractor who has moved on.
The solution?
Pipework, leak detection and maintenance from one licensed company.
Pipes laid in a rushFirst-fix plumbing by the builder
Laid as part of the build, before the walls close.
Leaks you cannot seeWater leak detection
We find the source first.
Nobody answers in an emergency24-hour emergency plumber
Plus regular maintenance contracts after handover.
How it works.
Call or whatsApp
Share apartment drawings, floor count and current construction stage for an initial assessment.
Site visit
Inspect wall chases, stack positions and planned fixture outlet locations on site.
Quotation and spec
Detailed quote listing pipe grades, fittings, insulation scope and isolation valve positions.
First-fix execution
Lay all supply and drain lines to exact heights and offsets from fixture drawings.
Test and handover
Pressure test each apartment and hand over a pipe-route record before plastering starts.
What sets the price.
No fixed rate applies; these factors shape the quote for each apartment or building project.
Get a quoteTotal outlet points
Each extra supply or drain point adds pipe length, fittings and labour to the scope.
Apartment and floor count
Multi-floor buildings need taller vertical stacks and one isolation valve set per apartment.
Pipe specification chosen
Heavier-wall PPR grade costs more upfront but extends service life under intensive building use.
Build stage at execution
Starting after slabs are already poured requires cutting trenches and additional backfill work.
Thermal insulation extent
Sleeving all hot runs through walls adds material and time compared to partial insulation.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
Apartment first-fix plumbing in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Ministry of Electricity and Water (water and drainage connections)
Questions, answered.
Call nowCan each apartment's first-fix plumbing be isolated from the others on the same floor?
Yes. A dedicated isolation valve is fitted on the supply line for each apartment, so water can be cut to one unit without affecting neighbours or other floors.
At what exact stage should apartment first-fix plumbing be carried out in a building project?
First-fix runs after blockwork is up and before the screed is poured. This lets drain pipes be bedded at the correct gradient and supply stubs protrude at the right fixture heights.
How does apartment first-fix differ from villa first-fix in practice?
Apartment buildings add shared vertical drain stacks serving multiple floors, per-unit isolation valves and coordination between adjacent apartments whose supply lines run in parallel wall chases.
How is the drain pipe pitch verified before the floor screed is closed?
Each drain run is checked with a spirit level before backfill, then a flow test confirms water moves cleanly without ponding. Both checks happen before any screed is poured.
Does Kuwait's hard water influence the pipe choice for apartment first-fix supply lines?
Hard water deposits scale rapidly inside older galvanised iron pipe, gradually narrowing the bore. PPR is preferred for new apartment first-fix because its smooth bore resists mineral build-up along its full length.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps