Apartment first-fix plumbing in Farwaniya
Apartment first-fix plumbing in Farwaniya means running cold and hot supply points and drain branches for each unit before drywall and ceiling grids close the walls. We pressure-test every point before the ducts are sealed to ensure no leaks are hidden inside the walls.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Farwaniya is made up of mid-rise residential blocks, mostly three to five storeys on plots 20 to 30 metres deep. The flats in these buildings follow fairly uniform layouts with kitchens and bathrooms in fixed positions, which simplifies pipe routing. But the density of units per floor means complete isolation of each apartment's network from its neighbours, and separate hot water supply points fed from rooftop tanks or local heaters.
Farwaniya lies in Farwaniya governorate, home to residential buildings on medium-sized plots near the Third Ring Road.
We run drain branches in separate ducts beneath each apartment floor with a minimum fall of 1 in 40 toward the vertical risers.
What the first-fix covers
Dedicated cold and hot supply points plus drain branches for each apartment, isolated and tested.
Cold supply runs
PPR pipe from the apartment riser to every cold outlet point.
Insulated hot supply
PPR hot runs fully sleeved with closed-cell foam inside wall chases.
Drain branch layout
uPVC swept branches from each fixture point to the vertical stack.
Per-apartment isolation
Isolation valve per apartment so one unit can be shut off independently.
Stub-out heights and offsets
Every supply and drain stub set to fixture drawing dimensions before screed.
Pressure test and handover
Documented pressure test per apartment before plastering, with a route record.
How it works.
Call or whatsApp
Share apartment drawings, floor count and current construction stage for an initial assessment.
Site visit
Inspect wall chases, stack positions and planned fixture outlet locations on site.
Quotation and spec
Detailed quote listing pipe grades, fittings, insulation scope and isolation valve positions.
First-fix execution
Lay all supply and drain lines to exact heights and offsets from fixture drawings.
Test and handover
Pressure test each apartment and hand over a pipe-route record before plastering starts.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Apartment first-fix plumbing
Other services in Farwaniya
Questions about Apartment first-fix plumbing in Farwaniya
Call nowHow do you separate cold and hot water networks for each apartment?
We run separate feed lines from the meter or communal tank for cold water, and other lines from the local heater or rooftop distribution point for hot water. Each apartment has its own isolated points completely separated from its neighbours.
When do you pressure-test the apartment pipes before sealing?
We pressure-test all supply and drain points after installation and before any walls or false ceilings close in. This ensures no hidden leaks exist in the copper or plastic pipes before we seal the ducts.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps