Apartment first-fix plumbing in Funaitees
Apartment first-fix plumbing in Funaitees involves distributing supply lines to multi-storey residential buildings close together, checking slope and flexibility standards before closure. We separate each unit with independent meters and feed lines.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Funaitees comprises multi-storey residential buildings, most between 8 and 12 storeys, with small to medium apartments of one or two bathrooms. Pipes run vertically through building columns and slabs with narrow spacing between units, requiring precision in routing drain lines to avoid crossing reinforcement bars. The close proximity of buildings also means each building's network must be isolated from the next from the inlet point.
Funaitees lies in Mubarak Al-Kabeer governorate, a residential zone near Mubarak Al-Kabeer administrative centre.
Drain pipes in tall buildings must slope at a rate of at least 1 centimetre per metre to ensure water flow.
What the first-fix covers
Dedicated cold and hot supply points plus drain branches for each apartment, isolated and tested.
Cold supply runs
PPR pipe from the apartment riser to every cold outlet point.
Insulated hot supply
PPR hot runs fully sleeved with closed-cell foam inside wall chases.
Drain branch layout
uPVC swept branches from each fixture point to the vertical stack.
Per-apartment isolation
Isolation valve per apartment so one unit can be shut off independently.
Stub-out heights and offsets
Every supply and drain stub set to fixture drawing dimensions before screed.
Pressure test and handover
Documented pressure test per apartment before plastering, with a route record.
How it works.
Call or whatsApp
Share apartment drawings, floor count and current construction stage for an initial assessment.
Site visit
Inspect wall chases, stack positions and planned fixture outlet locations on site.
Quotation and spec
Detailed quote listing pipe grades, fittings, insulation scope and isolation valve positions.
First-fix execution
Lay all supply and drain lines to exact heights and offsets from fixture drawings.
Test and handover
Pressure test each apartment and hand over a pipe-route record before plastering starts.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Apartment first-fix plumbing
Other services in Funaitees
Questions about Apartment first-fix plumbing in Funaitees
Call nowHow do you separate water and drain networks between adjacent apartments on the same floor?
Each apartment gets an independent meter and separate feed line starting from the main riser before branching within the unit. Each apartment's drain pipes are run in complete isolation through dedicated channels until they reach the main vertical stacks.
What clearance is required between drain pipes and concrete reinforcement?
A minimum 50 millimetre clearance is required between any drain pipe and any reinforcement bar to ensure concrete integrity. We verify this spacing with the site engineer before floor pouring.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps