Kitchen gypsum in Kuwait

Kitchen gypsum board built right, finished clean

Moisture-resistant board at ceiling and surround, with extractor hood, water pipes and lighting wiring hidden behind a durable, smooth finish.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates
What the kitchen scope covers - Kitchen gypsum

What the kitchen scope covers

Steel framing, moisture-resistant boarding and full concealment of kitchen services.

  • Galvanised steel frame

    Correctly sized stud and track frame built to handle kitchen steam.

  • Moisture-resistant board

    Green-face moisture-resistant board used across all kitchen zones.

  • Extractor duct boxing

    Boxing the extractor duct in a tight gypsum frame with a neat grille opening.

  • Pipe and cable routing

    Water pipes and lighting cables routed behind board before fixing.

  • Taping and jointing

    Fibre tape and jointing compound built up to a smooth, paint-ready surface.

  • Precise service cut-outs

    Measured openings for light points, AC grilles and the extractor hood.

Materials and methods used

  1. 12.5 mm moisture-resistant board

    Green-face board engineered to resist sustained steam without swelling or delaminating.

  2. Heavy-gauge galvanised stud and track

    Heavier gauge frame resists vibration and supports upper cabinet fixings through the board.

  3. Fibreglass tape and multi-coat compound

    Fibreglass tape prevents joint cracking under the repeated heat and cold cycling in a kitchen.

  4. Moisture-sealing primer

    Applied before finish paint to seal the board surface and prevent joint bleed-through.

Common mistakes in kitchen gypsum work

  1. Using standard board in a kitchen

    Standard board absorbs cooking steam, warps and delaminates within a short time.

  2. Fully sealing the extractor boxing

    Sealing the boxing airtight traps heat, weakens the board and blocks future access for maintenance.

  3. Omitting the perimeter relief gap

    No perimeter gap means cracking appears at the wall junction under repeated heating and cooling.

  4. Routing cables after boards are fixed

    Cutting into fixed boards weakens the frame and leaves visible patches in the finished surface.

Part of: Gypsum board

More in gypsum board.

What goes wrong with most finishing.

The finish is what you see every day, and its mistakes do not hide. These three are the most common.

  1. 01

    A rushed finish

    The finish is what you live with every day. Rushing it shows in every corner.

  2. 02

    Four contractors for one finish

    Tiling, gypsum, paint and aluminium crews who never talk to each other.

  3. 03

    After-care that never comes

    Once you have the keys, it is hard to find anyone to come back and fix what shows up.

The solution?

Full finishing, and maintenance after it, from one licensed company.

  1. A bathroom finished in modern marble
    A rushed finish

    Turnkey finishing

    Marble, tiling, gypsum and paint from one company.

  2. A gypsum ceiling with hidden lighting in a modern living room
    Four contractors for one finish

    One company for every trade

    No gaps between the tiler, the gypsum crew and the painter.

  3. A finished modern living room with a marble floor
    After-care that never comes

    Regular maintenance after handover

    And finishing on instalments if you need it.

How it works.

  1. Call or whatsApp

    Contact us to arrange a kitchen site visit at a convenient time.

  2. Site measure and survey

    We measure ceiling and walls and record all existing service positions.

  3. Quote and layout drawing

    A detailed quote with a layout showing frame, service routes and cut-out positions.

  4. Framing and boarding

    Frame fixed, services routed, boards fitted with correct perimeter relief gaps.

  5. Finishing and handover

    Taping, jointing, priming and a final check before handing over.

Call now

What sets the price.

No fixed rate applies; these 5 factors shape every kitchen gypsum quote.

Get a quote
  1. Total surface area

    Combined area of ceiling, walls and boxing to be boarded.

  2. Services routing complexity

    Number of pipe runs, cable routes and duct lines to be concealed.

  3. Removal of existing finish

    Stripping old board, suspended tiles or an existing ceiling adds labour and time.

  4. Extractor hood boxing size

    Duct size and route length affect framing material and number of boards used.

  5. Height and site access

    Above-standard ceiling height or a narrow kitchen raises scaffold and time requirements.

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Kitchen gypsum in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.

Official references: Kuwait Fire Force (safety requirements in finishing work)

Questions, answered.

Call now
Can kitchen gypsum board be fitted over an existing suspended tile ceiling?

Usually not. Old tile ceilings rarely give a level enough base and may hide problems underneath. Removing them and starting with a new galvanised frame gives a flat, properly anchored result.

Is green moisture-resistant board enough for a kitchen, or is there a stronger option?

Green board is sufficient for most residential kitchens when combined with a suitable primer and paint. High-steam commercial kitchens may call for a cement-fibre board or direct tiling rather than gypsum.

How does Kuwait's intense heat affect gypsum board above a kitchen ceiling?

Outdoor heat alone does not damage interior board, but repeated steam from cooking followed by sudden AC cooling creates expansion and contraction cycles. Correct perimeter gaps and fibreglass tape protect against the resulting joint stress.

Can upper kitchen cabinets be hung off the kitchen gypsum frame?

Cabinets must be anchored into the concrete or block wall behind the board, not into the gypsum or its frame alone. The board acts as a finish layer; fixing bolts pass through it into the structural wall.

Can a kitchen gas pipe be boxed inside gypsum board?

Gas pipes require continuous ventilation and permanent access, so they cannot be sealed inside a closed gypsum boxing. A ventilated box with a removable access panel is the accepted approach.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works