Gypsum board services
Full gypsum board works covering ceilings, walls, partitions, decor and specialist wet-area board
Gypsum ceilings
Flat or multi-level ceilings housing lighting and AC ducts
Walls and partitions
Lightweight partitions and wall linings to divide spaces quickly
Gypsum decor and design
Cove recesses, cornices and decorative detail work fitted accurately
Moisture-resistant board
Green moisture-resistant board suited to bathrooms and kitchens
Gypsum TV wall
Custom gypsum TV-wall units with concealed cable runs behind
Gypsum-board room
Full-room gypsum lining from ceiling down to all four walls
Signs your space needs gypsum board work
Sagging or cracked ceiling
A sagging or cracked board ceiling signals fixing failure or moisture absorption and needs replacement
Exposed AC ducts
Visible ductwork or conduit below the raw slab is a clear sign a board ceiling is needed
Dated lighting with no cove
Bare hanging fixtures with no recess or cove light mean the ceiling was never properly finished
Peeling board in a wet area
Swelling or peeling board near a shower or basin means standard board was used instead of moisture-resistant
Common mistakes in gypsum board installation
Under-spec metal framing
Using thin studs or over-wide stud spacing causes the ceiling or wall to flex and sag later
Standard board in wet areas
Fitting standard board near steam or water makes it swell, crumble and harbour mould quickly
Skipping expansion gaps
Omitting perimeter relief gaps lets Kuwait's heat cycles force the board to crack along its joints
Jointing without tape
Applying filler over board joints without embedding jointing tape produces visible cracks within weeks
Inside gypsum board.
How gypsum board work is done right
Every gypsum board ceiling starts with a metal frame hung level from the concrete slab and secured firmly. The frame level is checked before any board goes up, and perimeter relief gaps are left at all walls to handle Kuwait's temperature swings. The void between the frame and raw slab is the stage at which AC ducts, conduit and lighting cables are routed before the boards are fixed.
Board type selection directly affects how long the work lasts. Standard board suits living areas and corridors, while bathrooms and kitchens require moisture-resistant board throughout. Decorative elements such as cornices, multi-level ceilings and TV walls need a layout decided before fixing starts so that lighting positions and cable runs are set correctly the first time.
Once boards are fixed, joints are filled with reinforced jointing compound bedded over fibre tape, then sanded flat before paint. A final check runs a long straightedge across the surface, inspects all perimeter joints and confirms that every hidden light recess and air-vent opening is fully framed, covered and accessible through a service hatch.
What goes wrong with most finishing.
The finish is what you see every day, and its mistakes do not hide. These three are the most common.
01A rushed finish
The finish is what you live with every day. Rushing it shows in every corner.
02Four contractors for one finish
Tiling, gypsum, paint and aluminium crews who never talk to each other.
03After-care that never comes
Once you have the keys, it is hard to find anyone to come back and fix what shows up.
The solution?
Full finishing, and maintenance after it, from one licensed company.
A rushed finishTurnkey finishing
Marble, tiling, gypsum and paint from one company.
Four contractors for one finishOne company for every trade
No gaps between the tiler, the gypsum crew and the painter.
After-care that never comesRegular maintenance after handover
And finishing on instalments if you need it.
How it works.
Contact us
Call or WhatsApp us to describe the space and requirement
Site measure
We visit, measure all surfaces and identify services routing
Quotation
A detailed quote covering materials, areas and method is provided
Installation
Frame, board, tape, joint and sand to a flat finish
Inspection and handover
Level, joints and service hatches checked before handover
Total surface area
Combined ceiling and wall area is the primary cost driver
Design complexity
Multi-level ceilings and cove details take considerably longer than flat finishes
Board type
Moisture-resistant board costs more than standard gypsum board
Services routing
Dense ductwork or conduit runs inside the void add time before boards close
Old board removal
Stripping an existing ceiling or partition adds cost before new work begins
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
Gypsum board in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Kuwait Fire Force (safety requirements in finishing work)
Questions, answered.
Call nowCan gypsum board be fixed over an existing old gypsum ceiling?
It is generally not advisable. The old frame may not carry the added load and could hide moisture damage. Removing the old ceiling and hanging a new metal frame from the raw concrete slab is the reliable approach.
What is the practical difference between standard and moisture-resistant gypsum board?
Moisture-resistant board contains additives that slow vapour absorption and limit mould growth. It is used wherever steam or water is nearby. Standard board suits dry rooms only and will swell if it gets wet.
Why do cracks appear at gypsum board joints shortly after installation?
The most common cause is joint filler applied without embedding fibre tape, or missing perimeter relief gaps at the walls. Kuwait's heat cycles amplify any omission in these two areas and the crack appears quickly.
Can AC ducts be fully hidden inside a gypsum board ceiling?
Yes, and that is the main purpose of most gypsum ceilings in Kuwait. The void depth is set to accommodate the duct size, and vent and lighting positions are fixed before the boards go up.
Does a gypsum board TV wall need special preparation for cables?
Yes. The TV position and cable routes for power and signal must be set before the boards are closed. A reinforced metal backing plate is fixed behind the hanging point to carry the screen weight securely.
Can gypsum board be used on external facades in Kuwait?
No. Gypsum board is strictly an interior material. Direct sun exposure and coastal humidity degrade it rapidly. External facades require entirely different materials such as stone cladding or reinforced render.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps