Fibreglass tank repair in Kuwait

Stop the leak, restore your fibreglass tank

Cracks patched, leaks sealed and the interior recoated with drinking-water-safe materials so your fibreglass tank holds clean water again

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates
What the repair covers - Fibreglass tank repair

What the repair covers

Full repair from crack assessment through recoating to a water-tight pressure check

  • Crack inspection

    Locating every crack, split or delaminated patch on the shell

  • Interior surface prep

    Drying and abrading the inner wall for sound material adhesion

  • Crack patching

    Filling cracks with fibreglass-compatible filler before any recoating

  • Interior recoating

    Applying a food-grade protective coat across the full inner surface

  • Leak-tightness test

    Filling the tank and monitoring to confirm the repair holds completely

  • Lid and vents check

    Verifying lid seal and vents to prevent any outside contamination

Materials and methods used

  1. Thickened epoxy resin

    Injected directly into the crack, it cures hard and bonds to the fibreglass shell without shrinking

  2. Fibreglass mat laminate

    Resin-saturated woven layers rebuild the mechanical strength of cracked or delaminated zones

  3. Interior gel coat

    A drinking-water-contact-approved finish coat protecting the inner surface from microbial growth and mineral deposits

  4. Abrasion and chemical cleaning

    Hand-sanding and chemical degreasing strip the old coat and contaminants before any patching or recoating begins

Before you call: what to check first

  1. Crack location and size

    Note whether the crack is on the base, side or hatch rim as location affects the repair method

  2. Backup water source

    Confirm you have a second tank or stored supply as the tank must be fully drained before work starts

  3. Tank age and past repairs

    Prior repairs or interior coats already applied help the technician gauge how much preparation is needed

  4. Access for the technician

    Check the hatch opening allows comfortable entry and that the area around the tank is not obstructed

Part of: Tank waterproofing & cleaning

More in tank waterproofing & cleaning.

What goes wrong with most plumbing.

Plumbing problems start hidden and end with breaking tiles. These three cost the most.

  1. 01

    Pipes laid in a rush

    Pipework rushed before the walls close stays hidden until it starts to leak.

  2. 02

    Leaks you cannot see

    A slow leak behind tiles shows up as damp, stains and a higher water bill.

  3. 03

    Nobody answers in an emergency

    A burst pipe at night cannot wait for a contractor who has moved on.

The solution?

Pipework, leak detection and maintenance from one licensed company.

  1. Water and drain pipes inside a wall before tiling
    Pipes laid in a rush

    First-fix plumbing by the builder

    Laid as part of the build, before the walls close.

  2. A moisture meter beside a tiled wall
    Leaks you cannot see

    Water leak detection

    We find the source first.

  3. A utility room with a new water heater and pump
    Nobody answers in an emergency

    24-hour emergency plumber

    Plus regular maintenance contracts after handover.

How it works.

  1. Call or whatsApp

    Describe the tank type and visible crack or leak to book a site visit

  2. Assessment

    Technician inspects inside and outside the shell and defines repair scope

  3. Drain and prep

    Tank is drained, cleaned, dried and the inner surface abraded ready for repair

  4. Patch and recoat

    Cracks are filled, damaged zones laminated and the interior finish coat applied

  5. Test and handover

    Tank is filled, monitored for tightness and handed over once repair is confirmed sound

Call now

What sets the price.

Cost is shaped by several tank-specific factors and confirmed only after a direct site assessment

Get a quote
  1. Number and size of cracks

    A single hairline crack differs greatly from multiple splits or large delaminated areas

  2. Tank capacity

    Larger tanks require proportionally more patching material and interior recoating

  3. Interior coating condition

    Flaking or cracked old coats must be stripped fully, adding to labour time and cost

  4. Tank location

    A roof tank is easier to access than a buried one requiring a drainage pump to empty

  5. Partial replacement need

    Sections with full structural breakdown may need replacement rather than patching, priced separately

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Fibreglass tank repair in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.

Official references: Ministry of Electricity and Water (water and drainage connections)

Questions, answered.

Call now
Can a fibreglass tank be repaired in place or does it need to be moved?

Most fibreglass tanks are repaired in place after draining and drying. Removal is only considered when access to a damaged section is completely impossible from the existing position.

How do I know whether a crack can be patched or the tank needs full replacement?

Localised or surface cracks respond well to patching. When the shell has lost structural stiffness across a large area or the inner surface has broken down extensively, replacement is more cost-effective than repeated repairs.

Does Kuwait's summer heat accelerate cracking in fibreglass tanks?

Roof-mounted tanks expand under intense midday heat and contract at night. This repeated thermal cycling fatigues the gel coat layer and leads to hairline cracks, especially on tanks that have been exposed to direct sun for many years.

Is the recoating material safe for drinking water contact?

The coatings applied are rated for drinking water contact. Full cure must be confirmed before the tank is refilled, as refilling too early can affect both the coating bond and water quality.

Does the hard water in Kuwait damage the interior coat of a fibreglass tank over time?

Mineral scale from hard water builds up on the interior coat and is abrasive when removed. Harsh scraping can scratch or thin the coating, so mild acid-based descalers are preferred during routine cleaning to protect the repaired surface.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works