Waterproof coating in Kuwait - Sharq

Waterproof coating in Sharq

Waterproof coating application in Sharq requires thorough concrete cleaning and crack repair before coating. We apply multiple liquid coating layers to ensure complete protection against water infiltration.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Roofs in Sharq span offices, hotels and residential buildings, mostly flat and wide surfaces exposed to wind and frequent rain. Concrete in these buildings needs careful inspection for fine cracks and weak points around drainage outlets and vents. We start with deep cleaning using brushes and pressure water, then seal cracks with epoxy filler before applying multiple liquid coating layers.

Sharq sits in Kuwait Capital governorate, a commercial, administrative and hotel district with high-rise buildings featuring wide flat roofs.

Sharq roofs require annual inspection for cracks and gaps around openings and drainage points to detect early potential leak sources.

Back to Waterproof coating

See also: Roof waterproofing in Sharq

What the work covers - Waterproof coating

What the work covers

Substrate cleaning, crack repair and multi-coat application of liquid waterproof coating.

  • Surface inspection

    Locating cracks, open pores and any spalling before work starts.

  • Cleaning and decontamination

    Removing dust, oils and old loose layers for proper coating adhesion.

  • Crack filling

    Sealing hairline and wider cracks with flexible repair mortar before coating.

  • Primer coat

    A penetrating primer that anchors the waterproof coating into the concrete substrate.

  • Waterproof coating coats

    Applying at least 2 cross-direction coats for uniform thickness and full coverage.

  • Corners and drain sealing

    Reinforcing vulnerable junctions at corners, drain collars and window sills.

How it works.

  1. Contact us

    Call or WhatsApp us and send photos of the affected surface.

  2. Site assessment

    We visit to measure the area and assess concrete and existing coating condition.

  3. Surface preparation

    Cleaning, crack repair and applying the bonding primer coat.

  4. Coating application

    Applying waterproof coating coats with reinforced corners and drain details.

  5. Handover check

    Checking coverage, coat thickness and full cure before handing over.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Waterproof coating in Sharq

Call now
How many liquid coating layers do we need to protect a wide roof from leaks?

Usually two to three coats, each 0.5 to 1 mm thick depending on the coating type and the roof's exposure level to water and wind.

Do you repair deep cracks before applying the liquid waterproof coating?

Yes, we fill cracks and voids with epoxy or compatible sealant material, because unfilled cracks undermine the coating's protection.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works