Membrane roof waterproofing in Sharq
Membrane roof waterproofing in Sharq protects the flat roofs of residential towers, hotels and office buildings from water ingress. We prepare the surface by removing debris and moisture, then lay the waterproofing roll in a continuous sheet and seal every joint and corner.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Sharq roofs span wide expanses of residential and hotel towers with service galleries for HVAC and electrical runs. The flat surface must slope gently towards drainage channels, and any water pooling around vents or service penetrations threatens the waterproofing layer. We lay the roll over a bituminous base and sealant, then seal every joint with UV and heat-resistant silicone sealant.
Sharq is in Kuwait's Capital governorate, a high-rise district near Kuwait Towers and Sharq Marina.
Tall buildings in Sharq require slope and drainage testing before membrane laying to prevent water pooling.
What the work covers
Substrate preparation, membrane laying and sealing every weak point through to handover.
Concrete preparation
Clean the deck, remove loose old layers and fill cracks before bonding.
Primer coat
Apply bituminous primer to ensure the membrane bonds firmly to the deck.
Torch application
Heat-weld each membrane roll to the deck for a full continuous bond.
Parapet edge sealing
Turn the membrane up parapet walls and seal edges with flexible flashing.
Drain collar detail
Bond and seal the membrane around each drain collar to stop water ingress.
Post-installation check
Inspect the full membrane, laps and details before the job is signed off.
How it works.
First contact
Call or WhatsApp us and describe the roof condition and leak symptoms.
Roof survey
We visit, inspect the deck, existing layers and all penetrations.
Quotation
We send a detailed quote covering membrane type, prep works and total cost.
Installation
Deck prep, primer, torch-welding rolls and sealing every edge and collar.
Check and handover
Full inspection of the completed membrane before final handover.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Membrane roof waterproofing
Other services in Sharq
Questions about Membrane roof waterproofing in Sharq
Call nowHow do you seal around roof vents and service penetrations during membrane work?
We fit a metal collar around each vent or pipe penetration, secured with sealant, then lay the roll over it and seal the upper edge with flexible silicone. Every penetration must be fully sealed to block lateral water seepage.
What is the difference in membrane work between a flat roof and a sloped one?
A flat roof needs a gentle slope created by sloped concrete or foam, with the roll laid horizontally and sealed tightly at joints. A steep slope is not suitable for roll membranes and requires a different waterproofing system such as rigid boards or liquid coatings.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps