Waterproof coating in Kuwait - Salhiya

Waterproof coating in Salhiya

Liquid waterproof coating is applied to roofs of mid-rise and high-rise residential and office buildings in Salhiya. We clean the slab of dust and salt deposits, repair cracks, then apply multiple coats of liquid waterproof sealant.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Salhiya roofs face intense sunlight and sharp thermal swings that cause surface cracking in older concrete slabs. Most buildings here are over twenty years old, and the original concrete holds salt and moisture. Before any coating goes down, we strip the entire slab, remove dust and salt efflorescence with high-pressure water, then fill cracks with flexible cementitious filler. After that we apply two or three coats of liquid sealant with set intervals between each to ensure full adhesion and cure.

Salhiya is in Capital governorate, a mixed commercial and residential district near Salhiya Commercial Complex and Sheraton Hotel.

We apply liquid coating to roofs on buildings that may exceed ten storeys, with at least one central drain point.

Back to Waterproof coating

See also: Roof waterproofing in Salhiya

What the work covers - Waterproof coating

What the work covers

Substrate cleaning, crack repair and multi-coat application of liquid waterproof coating.

  • Surface inspection

    Locating cracks, open pores and any spalling before work starts.

  • Cleaning and decontamination

    Removing dust, oils and old loose layers for proper coating adhesion.

  • Crack filling

    Sealing hairline and wider cracks with flexible repair mortar before coating.

  • Primer coat

    A penetrating primer that anchors the waterproof coating into the concrete substrate.

  • Waterproof coating coats

    Applying at least 2 cross-direction coats for uniform thickness and full coverage.

  • Corners and drain sealing

    Reinforcing vulnerable junctions at corners, drain collars and window sills.

How it works.

  1. Contact us

    Call or WhatsApp us and send photos of the affected surface.

  2. Site assessment

    We visit to measure the area and assess concrete and existing coating condition.

  3. Surface preparation

    Cleaning, crack repair and applying the bonding primer coat.

  4. Coating application

    Applying waterproof coating coats with reinforced corners and drain details.

  5. Handover check

    Checking coverage, coat thickness and full cure before handing over.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Waterproof coating in Salhiya

Call now
How do you remove salt and dust from an old roof slab?

We use high-pressure water jets and mechanical scrubbing to remove salt deposits, dust and algae, then dry the slab completely before filling cracks and applying the waterproof coating.

How many coats does a Salhiya roof need?

Usually two or three coats depending on the concrete condition and existing cracks. Each coat must cure fully before the next is applied to ensure durable waterproofing.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works