Floor-to-floor soundproofing in Yarmouk
In Yarmouk, sound isolation between floors is driven by closely spaced multi-storey residential buildings. We identify impact paths through slabs and install decoupling separators with tightly sealed finished surfaces.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Yarmouk is marked by closely spaced residential blocks on medium-sized plots, mostly five to eight storeys built in different periods. Noise from the floor above is a common complaint because wiring, pipes and footsteps travel straight through the solid concrete ceiling. When carrying out soundproofing, we scan pre-made frames (drywall and elastic supports) and test gaps before installation to avoid acoustic bridges. The finished layers of specialist gypsum boards and metallic insulation reduce impact noise by 30 to 40 decibels.
Yarmouk is in the Capital governorate, home to the Yarmouk Co-op and the Yarmouk Sports Club.
Buildings in Yarmouk typically stand at five to eight storeys, with clearance between concrete slabs and flooring from 25 to 30 cm.
What the work covers
Survey impact paths through the slab, then install decoupling layers and finished surfaces
Impact path survey
Locate where impact noise travels through the slab and columns
Resilient underlay layer
Dense resilient mat installed between the slab and the floating screed
Floating floor build-up
Compression screed poured over the mat without rigid contact with walls
Perimeter isolation strip
Resilient strip around the room perimeter blocks vibration transfer through the wall base
Decoupled ceiling below
Suspended ceiling hung on resilient channels breaks the downward vibration path
Post-installation check
Impact tap test confirms direct sound paths are sealed before handover
How it works.
Call or whatsApp
Describe the affected floor and noise type to book the site visit
Site survey
We inspect the slab, existing floor and map the impact transmission paths
Quotation
You receive a detailed quote covering materials, method and work schedule
Layer installation
Resilient mat, floating screed, perimeter strip and ceiling work installed to spec
Test and handover
Impact tap test confirms sound paths are closed before final handover
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Floor-to-floor soundproofing
Other services in Yarmouk
Questions about Floor-to-floor soundproofing in Yarmouk
Call nowDoes floor soundproofing require lifting the entire floor or can frames be installed from below only?
The best option is to lift the floor to remove dirt and moisture from under the old ceiling, then install frames at safe distances. If that is not possible, we mount them from below with suspended plaster, but the result is less effective.
Does humidity affect the quality of soundproofing after installation?
Yes, high humidity can affect gypsum boards and insulation over time. We use moisture-resistant materials and install proper ventilation in the sealed cavity to reduce condensation and dampness.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps