Floor-to-floor soundproofing in Kuwait City
Sound isolation between floors in Kuwait City requires precise surveying of impact paths through concrete slabs. We install decoupling layers and finished surfaces to cut impact noise between adjacent residential units.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Kuwait City contains multi-storey residential buildings and mixed-use towers, many built decades ago with heavy concrete slabs and no original acoustic treatment. Footsteps and furniture noise from the floor above travel straight through the ceiling because the only air gap is standard paint and gypsum. When we carry out the isolation, we lift the existing floor, mount suspended frames with decoupling gaps, then cover them with gypsum and acoustic panels before final finishing.
Kuwait City is in the Capital governorate, where the Grand Mosque, Kuwait Towers and Liberation Square are located.
Concrete slabs in older Kuwait City buildings are typically 25 cm thick and require an additional air gap of at least 8 cm above them.
What the work covers
Survey impact paths through the slab, then install decoupling layers and finished surfaces
Impact path survey
Locate where impact noise travels through the slab and columns
Resilient underlay layer
Dense resilient mat installed between the slab and the floating screed
Floating floor build-up
Compression screed poured over the mat without rigid contact with walls
Perimeter isolation strip
Resilient strip around the room perimeter blocks vibration transfer through the wall base
Decoupled ceiling below
Suspended ceiling hung on resilient channels breaks the downward vibration path
Post-installation check
Impact tap test confirms direct sound paths are sealed before handover
How it works.
Call or whatsApp
Describe the affected floor and noise type to book the site visit
Site survey
We inspect the slab, existing floor and map the impact transmission paths
Quotation
You receive a detailed quote covering materials, method and work schedule
Layer installation
Resilient mat, floating screed, perimeter strip and ceiling work installed to spec
Test and handover
Impact tap test confirms sound paths are closed before final handover
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Floor-to-floor soundproofing
Other services in Kuwait City
Questions about Floor-to-floor soundproofing in Kuwait City
Call nowHow do we cut footstep noise from the upper unit without removing the existing floor tile?
We lift the existing tile and sand layer, mount metal frames on decoupling brackets suspended from the ceiling, then install acoustic insulation and gypsum boards before resurfacing and new tiling.
Does floor-to-floor soundproofing reduce the room height of the unit?
Yes, the height will reduce by approximately 10 to 12 cm for the suspended frames, insulation and finished surface. This clearance must be confirmed before work begins.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps