Waterproof coating in Kuwait - Waha

Waterproof coating in Waha

Liquid waterproof coating in Waha protects concrete roofs from water seepage and moisture penetration. We clean the substrate, repair cracks, then apply multiple coats of liquid sealant to ensure lasting protection.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Waha is made up of low to mid-rise residential buildings on medium-sized plots, most built in past decades with varying maintenance levels. The exposed concrete roofs face harsh sun, sand-laden winds, and extreme dryness in summer, which speeds concrete cracking and water leakage during rare rainy spells. Applying waterproof coating here requires thorough cleaning of dust and surface salts, repair of existing cracks, and then multi-coat application before sealing.

Waha lies in Jahra governorate, a residential area with exposed concrete roofs that need protection from seepage and moisture.

Liquid waterproof coats are applied to a total thickness of no less than 2 millimetres to ensure effective coverage on the concrete surface.

Back to Waterproof coating

See also: Roof waterproofing in Waha

What the work covers - Waterproof coating

What the work covers

Substrate cleaning, crack repair and multi-coat application of liquid waterproof coating.

  • Surface inspection

    Locating cracks, open pores and any spalling before work starts.

  • Cleaning and decontamination

    Removing dust, oils and old loose layers for proper coating adhesion.

  • Crack filling

    Sealing hairline and wider cracks with flexible repair mortar before coating.

  • Primer coat

    A penetrating primer that anchors the waterproof coating into the concrete substrate.

  • Waterproof coating coats

    Applying at least 2 cross-direction coats for uniform thickness and full coverage.

  • Corners and drain sealing

    Reinforcing vulnerable junctions at corners, drain collars and window sills.

How it works.

  1. Contact us

    Call or WhatsApp us and send photos of the affected surface.

  2. Site assessment

    We visit to measure the area and assess concrete and existing coating condition.

  3. Surface preparation

    Cleaning, crack repair and applying the bonding primer coat.

  4. Coating application

    Applying waterproof coating coats with reinforced corners and drain details.

  5. Handover check

    Checking coverage, coat thickness and full cure before handing over.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Waterproof coating in Waha

Call now
Must concrete cracks be repaired before applying liquid waterproof coating?

Yes, existing cracks allow water to seep behind the coating layer. We fill cracks with suitable material first, then apply the waterproof layer over them for complete protection.

How many coats of waterproof sealant are needed on a concrete roof in Waha?

We typically apply at least three coats, with full drying between each layer. This ensures sufficient thickness and seals any small gaps that might cause leakage.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works