Wood parquet in Sharq
Wood parquet installation in Sharq requires sound substrate preparation and reliable adhesive bonding from the first board onward. This central Capital district features modern residential towers and villas with expansive floor areas.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Most residential buildings in Sharq are newly built with flat concrete floors near sea level, but moisture from the nearby Gulf requires waterproofing treatment before any wood board goes down. We test concrete moisture content and treat it with a moisture barrier, then select an adhesive suited to the coastal climate. Boards are laid in uniform gaps and weighted with distributed loads until the adhesive cures fully, then the surface is sanded and sealed with a protective coat.
Sharq sits in Capital governorate, a district of modern residential buildings near Kuwait Towers and the Gulf waterfront.
Sharq's relative humidity is high due to coastal proximity, requiring a moisture barrier before parquet bonding begins.
What the service covers
board selection and substrate work through to the final sealed and cleaned floor
Substrate levelling
grinding and levelling the floor so every board bonds flat and even
Moisture barrier
barrier coat between concrete and wood boards to block rising moisture
Board installation
glue-down fixing with gap control and alignment checked every row
Cutting and details
precise cuts around columns, door frames and thresholds with no visible gaps
Sanding and finishing
full-floor sanding followed by multiple lacquer coats to seal the surface
Final inspection
checking every board for bond, level and finish before handover
How it works.
Call or whatsApp
describe the space, wood preference and any existing floor condition
Site visit
we measure the area, check substrate level and identify any moisture risk
Quotation
a detailed quote covering boards, adhesive, levelling and finishing coats
Installation
substrate levelling, moisture barrier, glue-down boards and lacquer finish
Inspection and handover
full floor check, cleaning and site handover to the client
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Wood parquet
Other services in Sharq
Questions about Wood parquet in Sharq
Call nowIs fresh concrete in the apartment ready straight away for parquet laying?
No, the concrete must cure fully and then its moisture content tested. In Sharq we apply a moisture barrier before laying boards to prevent moisture absorption from the nearby Gulf.
What spacing should be left between one parquet board and the next during laying?
We leave a small uniform gap between boards to allow wood expansion and contraction with humidity and temperature changes. This gap is covered later by the trim base.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps