Stair parquet in Sharq
Stair parquet in Sharq demands precise levelling of each tread and riser, metal nosing fitted flush, and sanding of the finished surface. The mixed commercial and residential towers in the area typically have stairs with uniform rise heights and standard dimensions.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Stairwells in Sharq's residential and office buildings typically run 12 to 16 treads with a standard 17 cm rise, connecting floors with relatively high ceilings. We check the level of each tread with a spirit level before laying the parquet boards, because any deviation affects climb comfort and fixing security. The municipality requires a metal nosing on the tread edge to reduce slip risk, which we fit before final sanding so it sits flush with the timber.
Sharq lies in the Capital governorate, a district of tall commercial and residential towers, including the Liberation Tower, along the waterfront.
We conform to a riser height of 17 cm and tread depth of 30 cm per Kuwaiti building code before fitting the parquet.
What the work covers
From levelling each tread and riser through to fitting nosings and sanding the finished surface
Tread preparation
Grinding and levelling each concrete tread before any board is laid
Accurate cutting
Cutting each board to the exact tread and riser dimension with correct angle
Adhesive bonding
Full-contact glue-down fixing rated for constant foot traffic on stairs
Stair nosings
Fitting front nosing profiles that protect the board edge and reduce slip risk
Riser boards
Covering the vertical riser face with a matching board for a clean unified look
Sanding and finish
Hand sanding followed by coating or waxing suited to the chosen wood species
How it works.
Call or whatsApp
Tell us the stair count and type to set a site visit time
Site measure
We measure each tread, check the concrete and record the stair pitch
Material selection
You choose the wood species, nosing colour and surface finish type
Prep and install
We level each tread then fix boards, nosings and risers in sequence
Finish and handover
Hand sanding and final coat, then we check every step before handover
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Stair parquet
Other services in Sharq
Questions about Stair parquet in Sharq
Call nowHow do you handle long stairwells without intermediate landings?
We break up long stairs into shorter runs with intermediate landings to reduce single-flight lengths and improve safety. We fit parquet to each section separately and sand the transitions carefully for visual alignment.
Can you work with mixed rise heights in a single stairwell?
Yes, but it requires levelling work beforehand. We apply self-levelling screed or light grinding to standardize the rise between each tread before fitting the parquet and nosing.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps