What the service covers
Tracing a hidden leak from the first symptom to its precise point beneath tiles or screed
Acoustic floor scan
Listening for water escape through tiles and bedding without breaking
Thermal wall imaging
Thermal camera reveals cool damp zones behind wall tiles
Line pressure test
Isolating pipe sections and pressure-testing to confirm the faulty line
Tracer dye tracing
Safe dye flows with drain leaks and surfaces at the outlet point
Break-point marking
Marking the exact tile location before any demolition begins
Detection report
Written report stating leak location, pipe type and recommended action
Tools and methods used
Acoustic listening device
Detects micro-vibration of escaping water through tile, mortar and concrete layers
Infrared thermal camera
Shows slight temperature differences between damp and dry zones behind surfaces
Hydraulic pressure pump
Isolates supply sections and holds pressure to reveal any sudden drop
Water-safe tracer dye
Added to drain lines to reveal the leak point without harming plastic pipes
Before you call us
Record the meter reading
Read the meter at night with all taps shut, compare it in the morning to confirm loss
Identify suspect tiles
Press the floor with your hand: hollow or raised tiles indicate water collecting beneath
Know your pipe layout
Keep any original pipe drawings or build-stage photos ready for the technician
Note when stains appear
Stains appearing only after use point to supply pipes, not drain lines
More in water leak detection.
What goes wrong with most plumbing.
Plumbing problems start hidden and end with breaking tiles. These three cost the most.
01Pipes laid in a rush
Pipework rushed before the walls close stays hidden until it starts to leak.
02Leaks you cannot see
A slow leak behind tiles shows up as damp, stains and a higher water bill.
03Nobody answers in an emergency
A burst pipe at night cannot wait for a contractor who has moved on.
The solution?
Pipework, leak detection and maintenance from one licensed company.
Pipes laid in a rushFirst-fix plumbing by the builder
Laid as part of the build, before the walls close.
Leaks you cannot seeWater leak detection
We find the source first.
Nobody answers in an emergency24-hour emergency plumber
Plus regular maintenance contracts after handover.
How it works.
Call or whatsApp
Describe stain location and when it appeared to book a visit
Site assessment
Technician checks tiles and walls, reads meter with isolation valve closed
Detection scan
Acoustic device and thermal camera scan the full suspect area
Mark the point
Exact location marked on the tile and findings explained to the owner
Report handover
Written report with leak location, affected pipe and suggested next action
What sets the price.
Quote varies by several factors tied to the site, pipe layout and extent of area to be scanned
Get a quoteArea to be scanned
Scanning one room floor differs from scanning a full storey
Buried pipe type
Old galvanised iron pipes are harder to trace than PPR or uPVC
Pipe burial depth
Pipes deep under multiple layers need longer acoustic scanning time
Number of test points
Each isolation and pressure point added at multiple branches raises work time
Visit timing
Emergency visits outside standard hours carry an additional charge
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
Under-tile leak detection in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Ministry of Electricity and Water (water and drainage connections)
Questions, answered.
Call nowCan detection be done without breaking a single tile before the location is confirmed?
Yes, acoustic sensors and thermal imaging work over the tile surface and locate the leak precisely enough to limit breaking to a single targeted point.
What does a hollow knock mean when walking on floor tiles?
It usually means leaked water has dissolved the bedding mortar and left a void. This is one of the clearest early signs of a hidden leak beneath the screed.
Are PPR pipes harder to detect than old galvanised iron pipes?
PPR conducts less sound, but thermal imaging compensates because water escaping from a PPR pipe creates a clear temperature contrast in the mortar and concrete layer.
Does Kuwait's hard water cause leaks under tiles?
Scale builds inside fittings and joints, raising internal pressure gradually until buried joints weaken. This is a common cause of slow hidden leaks under tiled floors.
Is detecting a drain leak under tiles different from detecting a supply pipe leak?
Yes. Supply lines are under constant pressure so acoustic listening and pressure tests are used. Drain lines carry no pressure so tracer dye and thermal imaging are the main methods.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps