Under-tile leak detection in Kuwait - Qibla

Under-tile leak detection in Qibla

Pinpointing a leak under tile in Qibla requires systematic tracing from the first moisture symptom to the exact rupture point, breaking tile only when necessary. We use specialized equipment to map water flow through sub-floor layers and soil around the plot.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Qibla buildings mix old residential villas with government and commercial towers, many suffering from old concrete foundation seepage or buried pipe failures under ceramic and stone floors. The sandy soil absorbs water quickly, hiding the original breach and making it harder to trace. We start with a surface scan of damp walls and floors, then use moisture detectors and thermal imaging to track water through concrete slabs before we dig.

Qibla is in the Capital governorate, a historic district near Gulf Road and Seif Palace where old and new buildings stand side by side.

Most supply pipes are buried 30 to 50 centimetres below the ground floor, so precise tracing must happen before any digging begins.

Back to Under-tile leak detection

See also: Water leak detection in Qibla

What the service covers - Under-tile leak detection

What the service covers

Tracing a hidden leak from the first symptom to its precise point beneath tiles or screed

  • Acoustic floor scan

    Listening for water escape through tiles and bedding without breaking

  • Thermal wall imaging

    Thermal camera reveals cool damp zones behind wall tiles

  • Line pressure test

    Isolating pipe sections and pressure-testing to confirm the faulty line

  • Tracer dye tracing

    Safe dye flows with drain leaks and surfaces at the outlet point

  • Break-point marking

    Marking the exact tile location before any demolition begins

  • Detection report

    Written report stating leak location, pipe type and recommended action

How it works.

  1. Call or whatsApp

    Describe stain location and when it appeared to book a visit

  2. Site assessment

    Technician checks tiles and walls, reads meter with isolation valve closed

  3. Detection scan

    Acoustic device and thermal camera scan the full suspect area

  4. Mark the point

    Exact location marked on the tile and findings explained to the owner

  5. Report handover

    Written report with leak location, affected pipe and suggested next action

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Under-tile leak detection in Qibla

Call now
How do you find the leak source if water appears far from the original break?

We trace water flow through concrete and sandy soil using moisture and thermal detectors. Water seeps under the floor toward low points, so we move the device gradually until we reach peak moisture concentration.

Do you break the tile immediately to repair the leak?

No. We pinpoint the location precisely using specialized detectors first, then open only a limited area around the actual leak point. This preserves intact tile and avoids unnecessary cost.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works