What this service covers
Locating and fixing all leak types in Kuwaiti homes and buildings.
Leak repair
Fixing leaking pipes once the exact fault point is confirmed.
Tank leak detection
Inspecting ground and roof tanks for cracks or leaking joints.
Under-tile leak detection
Tracing buried pipe leaks beneath tiles without wide demolition.
Non-destructive detection
Acoustic and thermal tools that detect leaks without damaging finishes.
Gas leak detection
Testing central gas lines and fittings to confirm any gas escape.
Camera leak detection
Inserting a camera inside pipes to identify internal cracks or breaks.
Signs you need leak detection
Sudden spike in water bill
An unexplained jump in the meter reading despite normal usage signals a hidden pipe leak.
Damp patches on walls
Dark patches or peeling paint on an internal or external wall without an obvious cause.
Lifted or hollow floor tiles
Tiles that flex or sound hollow underfoot are a clear sign of moisture trapped beneath.
Unexplained drop in water pressure
Sudden pressure loss at one or more taps when the street supply has not changed.
Before you call us
Note the meter reading
Record the meter reading, shut all taps and check whether the meter still moves.
Mark the suspect spots
Note the exact wall, floor or ceiling spots showing damp or damage to speed up inspection.
Gather any pipe drawings
Look for the original plumbing drawings from the contractor or municipality if available.
Know when it started
Knowing when the damp or bill change first appeared helps the technician narrow the search.
Inside water leak detection.
How leak detection is done right in Kuwait
Proper leak detection starts with a systematic survey, not immediate breaking. The technician uses acoustic listening devices that pick up the sound of water escaping inside walls and floors, alongside thermal cameras that reveal temperature differences caused by hidden moisture. In Kuwaiti homes, PPR and uPVC supply pipes run concealed in plaster or under tiles, which means visible damage often appears only after the leak has already spread some distance from its source.
Kuwait's hard, mineral-heavy water accelerates joint corrosion and builds scale inside older galvanised iron pipes, raising the risk of failure over time. Ground and roof water tanks are equally prone to cracks in their walls or base and are checked after emptying using a pressure test or internal camera survey. Where a gas line is suspected, a separate gas-specific detector test is carried out before any breaking work begins, keeping the two fault types clearly apart.
Once the leak point is precisely confirmed, only the minimum area of tile or plaster needed for access is opened. The faulty joint is repaired or the damaged pipe section replaced, then a pressure test is run to verify the fix holds before the opening is closed. The owner should ask for a written record of the leak location and repair method used. That document becomes a useful reference if a related fault appears in the same zone later.
What goes wrong with most plumbing.
Plumbing problems start hidden and end with breaking tiles. These three cost the most.
01Pipes laid in a rush
Pipework rushed before the walls close stays hidden until it starts to leak.
02Leaks you cannot see
A slow leak behind tiles shows up as damp, stains and a higher water bill.
03Nobody answers in an emergency
A burst pipe at night cannot wait for a contractor who has moved on.
The solution?
Pipework, leak detection and maintenance from one licensed company.
Pipes laid in a rushFirst-fix plumbing by the builder
Laid as part of the build, before the walls close.
Leaks you cannot seeWater leak detection
We find the source first.
Nobody answers in an emergency24-hour emergency plumber
Plus regular maintenance contracts after handover.
How it works.
Call or whatsApp
Describe the signs you noticed and where the suspect spots are.
Site inspection
Technician visits, surveys the area and runs detection equipment.
Pinpoint the fault
Exact leak point confirmed and documented before any opening.
Repair and test
Leak repaired and pressure test run to confirm the fix holds.
Reinstate and hand over
Access openings closed and a work report handed to the owner.
Leak location and depth
Leaks under tiles or inside walls cost more to reach than exposed ones.
Detection method needed
Acoustic tools, thermal cameras and pipe cameras each carry different costs.
Breaking and reinstatement
The area of tile or plaster opened and reinstated affects the total cost.
Existing pipe material
Old galvanised iron takes longer to repair than PPR or uPVC pipes.
Number of inspection points
Leaks spread across multiple zones need more inspection time and labour.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
Water leak detection in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Ministry of Electricity and Water (water and drainage connections)
Questions, answered.
Call nowCan the leak source be found without breaking up the whole floor?
Yes. Acoustic listening devices and thermal cameras narrow the fault to a precise spot, so only the minimum area of tile or plaster needed to reach and repair the leak is opened.
Why has my water bill risen when I can see no visible leak?
Pipes in Kuwaiti homes run hidden inside walls or under tiles, so water can escape for a long time before any surface sign appears. A meter that still moves when all taps are closed is a reliable indicator of a concealed leak.
Does camera leak detection work on all pipe types?
Camera tools work inside PPR, uPVC and old galvanised iron pipes as long as the diameter allows entry. In very narrow runs or tight bends, acoustic or thermal methods are used instead.
When is the tank the source of the leak rather than the pipes?
If the water level in a ground or roof tank drops without actual use, or damp appears on the surrounding walls, the tank itself is the likely source. It is inspected after emptying using a pressure test or an internal camera.
Is gas leak detection different from water leak detection?
Yes. Gas detection uses dedicated gas-sensing instruments entirely separate from water detection tools. A standalone test is run on the central gas lines, and the main supply should be shut off immediately if a gas escape is suspected.
What should I do if I discover a leak at night?
Close the main isolation valve inside the house immediately to stop the flow, then contact us through the 24-hour emergency line. Do not wait until morning if water is accumulating quickly.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps