What the contract covers
Regular care of your pool's water, surfaces, equipment and surrounding deck.
Water chemistry
Test and adjust chlorine, pH and alkalinity at every visit.
Filter cleaning
Backwash or rinse filter media to maintain proper flow rate.
Pump and motor check
Check pressure, flow and seals to catch faults early.
Vacuuming and brushing
Vacuum sediment and brush walls to prevent algae build-up.
Lighting inspection
Verify underwater light seals and fittings are intact and safe.
Visit report
Written record of readings and work done after each visit.
Materials and methods used
Slow-release chlorine tablets
Dissolve slowly between visits to hold steady disinfection in extreme heat.
Silica sand filtration media
Traps fine particles; its condition is assessed and replaced when efficiency drops.
Digital water test kit
Gives precise on-site readings for chlorine, pH, alkalinity and calcium hardness.
Chlorine shock treatment
Concentrated dose added when algae appears or after heavy dust storms.
Common pool maintenance mistakes
Skipping pH tests
Wrong pH makes chlorine ineffective and corrodes tiles and metal fittings.
Running a clogged filter
Back-pressure strains the pump to failure and turns water cloudy quickly.
Adding chemicals incorrectly
Mixing chemicals together at once causes reactions that bleach or pit surfaces.
Ignoring pump seals
A worn seal leaks water slowly and admits air, stopping circulation entirely.
More in swimming pools.
What goes wrong on most builds.
Most problems are built in early and found late. These three cost the most to fix.
01Shortcuts under the finish
Concrete and steel disappear under the finish, so a shortcut there stays hidden until it cracks.
02Mistakes behind the wall
A water or drain mistake found after the finish means breaking new tile.
03A rushed finish
The finish is what you live with every day. Rushing it shows in every corner.
The solution?
One licensed company for the structure, the pipes and the finish.
Shortcuts under the finishEngineering supervision on site
The structure is followed before it is covered.
Mistakes behind the wallPlumbing by the same company
Laid before the walls close.
A rushed finishFinishing, and maintenance after
The same company finishes and maintains.
How it works.
First contact
Call or WhatsApp us to describe your pool and request a contract.
Site inspection
We visit to inspect equipment, filter type and measure pool volume.
Contract proposal
We present a clear contract specifying visit schedule, scope and cost.
Service start
Scheduled visits begin according to the agreed timetable.
Ongoing reporting
You receive visit reports and any technical recommendations after each round.
What sets the price.
Contract value varies with several factors specific to each pool and site.
Get a quotePool size
Water volume sets chemical quantities and cleaning time per visit.
Visit frequency
Weekly contracts cost more than fortnightly or monthly schedules.
Filter system type
Sand, cartridge and salt-cell systems each need different servicing materials.
Parts coverage
Contracts covering parts replacement cost more than labour-only agreements.
Pool location
Pools near open areas collect dust faster and need more frequent attention.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
Pool maintenance contracts in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Kuwait Municipality (building permits and plans)
Questions, answered.
Call nowHow often should a pool be serviced during Kuwait's summer?
Extreme heat accelerates chlorine breakdown and encourages algae growth, making weekly visits appropriate in peak summer. In cooler months a fortnightly schedule is usually sufficient.
Can an existing pool be converted to a salt-chlorine system as part of a maintenance contract?
Yes, a salt-chlorine generator can be fitted to most existing filtration systems. This involves checking compatibility with current surfaces and calibrating the new cell before regular servicing begins.
Why does pool water turn green even when a maintenance contract is in place?
It usually happens after a heavy dust storm or heavy use that depletes chlorine rapidly between visits. Regular water tests in visit reports catch the imbalance before it turns critical.
Does routine servicing include checking underwater lighting?
Yes, each visit includes inspecting underwater light seals and verifying connections. A leaking seal is a safety risk and is flagged for repair immediately.
What happens if the pool needs a repair that falls outside the contract scope?
The fault is recorded in the visit report and referred to you with a separate repair estimate. No additional work is carried out without your prior approval.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps