What the service covers
Full inspection of shell, pipework and fittings to pinpoint every leak source
Pipe pressure test
Isolate supply and return lines and test each circuit separately
Dye trace test
Inject tracer dye to follow leak paths through shell cracks
Acoustic detection
Detect underground water movement without initial excavation
Fitting and joint check
Inspect all pipe penetrations, light fittings and collar seals
Leak location report
Document every leak point with photos and measurements for repair
Targeted repair
Repair confirmed leak points without unnecessary structural demolition
Signs your pool is leaking
Consistent water level drop
Losing more than 2 cm daily, beyond what Kuwait summer evaporation alone explains
Saturated ground around pool
Permanently soft or wet soil at the pool edge with no rain present
Chemical consumption spike
Frequent chemical top-up despite regular servicing suggests hidden water replacement
Cracks visible on shell floor
Hairline or open cracks visible on the tiled or plastered pool floor underwater
Common pool leak detection mistakes
Guessing the leak source
Breaking ground at a suspected spot without pressure testing wastes time and money
Ignoring return lines
Focusing only on the shell while overlooking return pipes leaves the leak active
Patching without full dry-down
Sealing a crack on a wet surface causes the repair to fail quickly
Refilling too soon
Pumping water back before repair materials cure fully restores the leak path
More in swimming pools.
What goes wrong on most builds.
Most problems are built in early and found late. These three cost the most to fix.
01Shortcuts under the finish
Concrete and steel disappear under the finish, so a shortcut there stays hidden until it cracks.
02Mistakes behind the wall
A water or drain mistake found after the finish means breaking new tile.
03A rushed finish
The finish is what you live with every day. Rushing it shows in every corner.
The solution?
One licensed company for the structure, the pipes and the finish.
Shortcuts under the finishEngineering supervision on site
The structure is followed before it is covered.
Mistakes behind the wallPlumbing by the same company
Laid before the walls close.
A rushed finishFinishing, and maintenance after
The same company finishes and maintains.
How it works.
First contact
Call or WhatsApp us with a brief description of what you notice
Site visit
A specialist technician visits to assess the pool and leak symptoms
Testing
Pressure, dye and acoustic tests pinpoint the exact leak source
Report and quote
We deliver a findings report and a repair cost quote
Repair and handover
Repair confirmed points then refill after full material cure
What sets the price.
Quote depends on pool size, leak type, access conditions and repair scope needed
Get a quotePool size
Larger pools require more test points and technician time
Leak type
Pipe leaks take longer to diagnose than visible shell cracks
Site access
Pools enclosed by finishes or structures raise inspection complexity
Number of leak points
Multiple leaks across shell and pipework increase the repair cost
Repair scope
Spot repair costs less than replacing a full pipe section or lining
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
Pool leak detection in Kuwait. We work across all six governorates of Kuwait: Capital, Hawalli, Farwaniya, Mubarak Al-Kabeer, Ahmadi, Jahra.
Official references: Kuwait Municipality (building permits and plans)
Questions, answered.
Call nowCan the leak be detected without fully draining the pool?
Yes, dye testing and visual inspection are carried out with the pool full. Draining is only needed for the repair stage or for deep shell leaks that require a dry surface to seal correctly.
How do I tell the difference between a leak and evaporation in Kuwait's summer?
The bucket test works: place a filled bucket at pool water level and compare the two level drops after 24 hours. If the pool drops faster than the bucket, a leak is confirmed.
Does the salty soil in Kuwait's coastal areas increase pool leak risk?
Yes, salt and groundwater in coastal areas accelerate corrosion of pipe joints and sub-slab waterproofing. Pools in those areas benefit from more frequent inspection than inland pools.
Does pool leak detection cover the pump room and filter equipment?
Yes, we check pump connections, filter housing joints, isolation valves and pressure lines leaving the equipment room, as many hidden leaks start at these connections.
Is the repair done in the same visit as the detection?
Usually not. Detection comes first because repair may require draining the pool or sourcing specific materials. Once the report is reviewed and the quote approved, a separate repair visit is scheduled.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps