Wall thermal insulation in Sharq
Wall thermal insulation in Sharq targets the tall residential towers and office blocks near Kuwait Bay. We assess the exterior wall thickness and internal cavities, then install rigid boards or injected foam to reduce heat transfer through the façade.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Sharq towers are mostly tall residential and office buildings exposed to direct solar radiation on their eastern and southern façades. The exterior walls are typically 20 to 30 cm thick brick and concrete with limited air cavities between layers. We measure cavity depth with ultrasound before injection and use low-density polyurethane foam for tight gaps, or mineral wool boards on interior walls facing the sun.
Sharq lies in the Capital governorate on Kuwait Bay's shoreline, where tall residential and office towers cluster near the Liberation Tower.
Exterior walls of Sharq towers face continuous thermal pressure from direct sun for up to eight hours daily.
What the work covers
Wall assessment through insulation fixing on exterior or interior face through to handover
Wall assessment
Check wall condition and identify which faces need insulation
Surface preparation
Clean wall and repair any cracks before board fixing
Insulation board fixing
Fix XPS or mineral wool boards with adhesive mortar and mechanical anchors
Mesh and render coat
Apply fibreglass mesh and reinforced render coat over boards for protection
Thermal bridge sealing
Insulate window lintels and edge columns to stop heat bypassing the boards
Final inspection
Measure insulation thickness and verify full coverage before handover
How it works.
Contact us
Call or WhatsApp us and describe which walls you want insulated
Site visit
We visit to measure walls, assess condition and confirm fixing method
Quotation
We submit a detailed quote covering materials, thickness and total cost
Installation
Prepare surface then fix boards, seal thermal bridges and apply render coat
Check and handover
Measure final thickness, verify full coverage, then hand over the work
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Wall thermal insulation
Other services in Sharq
Questions about Wall thermal insulation in Sharq
Call nowDo you insulate exterior walls from outside or inside?
We choose based on façade condition and available space. Exterior insulation is better to block heat before it enters, but requires scaffolding and façade protection. Interior insulation is easier to execute but reduces room space slightly.
What insulation thickness is needed to meaningfully reduce cooling costs?
We typically use 5 to 10 cm thickness depending on material type and sun exposure. We measure the existing cavity first, then agree optimal thickness with the consulting engineer.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps