Heat-reflective coating in Kuwait - Hassawi

Heat-reflective coating in Hassawi

Heat-reflective roof coating in Hassawi addresses intense heat in the scattered residential villas and apartment blocks across the area. We remove old layers, prepare the surface, then apply reflective coat in properly executed layers.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Hassawi has older villas with worn roofs and mid-rise apartment blocks with standard concrete surfaces. Much of the roof in these buildings holds peeling old paint or accumulated moisture, requiring deep cleaning before reflective coating. We use wire brushes and pressure washers to strip old paint and dirt. We also inspect joints between concrete panels and small cracks, repairing them with flexible filler before coating.

Hassawi sits in Farwaniya governorate, a mixed residential district of villas and mid-rise apartment buildings.

Cleaning the roof of old paint and dirt is essential before reflective coat goes on worn surfaces.

Back to Heat-reflective coating

See also: Thermal insulation in Hassawi

What the work covers - Heat-reflective coating

What the work covers

Surface preparation through final reflective coat on roofs, parapets and exterior walls.

  • Surface inspection

    Assess slab or tile condition before any coating is applied.

  • Cleaning and priming

    Remove dust, grease and loose material, then apply the correct primer.

  • Roof reflective coat

    Multi-layer reflective coating over the full horizontal roof deck.

  • Facade treatment

    Reflective coat on sun-exposed exterior walls and parapets.

  • Joints and edge sealing

    Seal roof perimeter joints and penetration collars before coating.

  • Final inspection

    Check for uniform coverage with no bubbles, pinholes or missed spots.

How it works.

  1. Get in touch

    Call or WhatsApp us to describe the surface and arrange a visit.

  2. Site inspection

    We assess surface condition, cracks, access needs and coating requirements.

  3. Quotation

    We submit a detailed quote covering materials, coats and total area.

  4. Preparation and application

    Clean, prime, then apply reflective coats to the specified thickness.

  5. Handover check

    We verify full coverage and no defects before signing off.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Heat-reflective coating in Hassawi

Call now
Can we coat an old roof covered in peeling paint?

Yes, but old paint must be completely removed first. We use wire brushes and pressure washers to clean the surface, then apply reflective coat on a clean, debris-free roof.

Does reflective coat seal small cracks in the roof?

Reflective coat is not a sealant, but it protects concrete from additional cracking due to heat. Pre-existing cracks must be filled with flexible filler before coating for better adhesion and full protection.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works