Waterproof coating in Anjafa
Waterproof coating in Anjafa protects roof concrete from water infiltration and moisture damage. We clean the surface, repair cracks, then apply multiple layers of liquid waterproof coating to form an airtight seal.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Anjafa has mid-rise residential buildings with flat concrete roofs on standard residential plots. Roofs here face seasonal rainwater pooling and dew accumulation, especially in cool months, and cracks from thermal shrinkage in the original concrete are common. Waterproofing starts with stripping old layers and scraping surface salt and rust, then injecting cracks with flexible filler before applying liquid coating layers.
Anjafa sits in Hawalli governorate, a residential district where concrete roofs need periodic waterproofing against moisture and infiltration.
Hairline cracks in Anjafa roofs typically do not exceed 2 mm width and require injection before liquid coating coverage.
What the work covers
Substrate cleaning, crack repair and multi-coat application of liquid waterproof coating.
Surface inspection
Locating cracks, open pores and any spalling before work starts.
Cleaning and decontamination
Removing dust, oils and old loose layers for proper coating adhesion.
Crack filling
Sealing hairline and wider cracks with flexible repair mortar before coating.
Primer coat
A penetrating primer that anchors the waterproof coating into the concrete substrate.
Waterproof coating coats
Applying at least 2 cross-direction coats for uniform thickness and full coverage.
Corners and drain sealing
Reinforcing vulnerable junctions at corners, drain collars and window sills.
How it works.
Contact us
Call or WhatsApp us and send photos of the affected surface.
Site assessment
We visit to measure the area and assess concrete and existing coating condition.
Surface preparation
Cleaning, crack repair and applying the bonding primer coat.
Coating application
Applying waterproof coating coats with reinforced corners and drain details.
Handover check
Checking coverage, coat thickness and full cure before handing over.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Waterproof coating
Other services in Anjafa
Questions about Waterproof coating in Anjafa
Call nowHow do you treat concrete cracks before applying waterproof coating?
We inspect cracks carefully, clean them with compressed air, then inject them with flexible filler that follows concrete movement. We then apply liquid coating layers over the prepared surface.
Must the old waterproofing layer be fully removed before recoating?
If the old layer is still intact and free from delamination and blistering, we can apply a new coat after thorough cleaning. If deteriorated, we remove it entirely.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps