Aluminium shutters in Sharq
Aluminium shutter installation in Sharq serves waterfront facades and office towers on tall residential and commercial buildings. We measure openings precisely, fabricate the drum box, side channels and bottom seal, and fit them to ensure protection from wind and salt spray.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Sharq towers are typically tall multi-storey structures with glazed facades and retail shopfronts on ground and lower levels. Aluminium shutters protect the shops and displays from direct sun, sandstorms and sea humidity. Side channels must be fixed to existing concrete panels or steel frames, and the upper drum needs strong mounting to handle the torque from repeated raising and lowering. A good bottom seal is essential because strong Gulf winds drive water under the openings.
Sharq is in Kuwait capital governorate, where tall commercial and residential towers cluster near Kuwait Towers and the Sharq marina district.
Shopfront and store-room openings require an aluminium drum diameter that resists horizontal sag across the span.
What the work covers
Measure, fabricate and fit aluminium shutters including drum box, side channels and bottom seal.
Measure and fabricate
Opening measured on site and slats cut to exact width and height.
Drum box fitting
Drum box fixed securely into the wall above the opening.
Side channel installation
Side channels set plumb to give smooth travel and a tight close.
Bottom seal
Rubber bottom seal fitted to block dust, insects and draught.
Powder-coat finish
Electrostatic powder coat in chosen colour, UV and salt resistant.
Spring calibration
Balance spring tensioned so the shutter holds position without dropping.
How it works.
First contact
Call or WhatsApp us with the opening count and building location.
Site measure
Our team visits to measure each opening and check lintel and wall condition.
Quotation
A detailed quote covering slats, drum box, channels, seals and fitting is sent.
Fabrication and fit
Slats cut to size, channels set plumb, drum box fixed and seals fitted.
Test and handover
Shutter tested for smooth travel, holding position and tight close before handover.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Aluminium shutters
Other services in Sharq
Questions about Aluminium shutters in Sharq
Call nowHow do we protect large shopfront openings from sea winds and salt?
We fit aluminium shutters with tight side channels and a flexible bottom seal that closes the gap completely when lowered, with rainwater drainage from the base. Extruded aluminium naturally resists salt corrosion.
Can shutters be fitted to existing steel frames or do we need a concrete base?
Yes, we fix to existing steel frames using steel brackets bolted securely. If the base is weak we reinforce it first to handle the shutter weight and repeated motion.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps