Aluminium shutters in Kuwait - Faiha

Aluminium shutters in Faiha

Aluminium shutter installation in Faiha serves quiet villas and small shops needing heat and sand protection. We measure each opening and fabricate the shutter with a drum, side channels and bottom seal suited to the desert climate.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Faiha is a district of small and medium villas spaced on reasonably wide plots, with some low-rise local shops and services. Older villas need shutters on south and west windows to cut heat and sand ingress, and openings are usually small to medium, one-and-a-half to two metres tall. The bottom seal and side channels must withstand strong winds and fine dust, so we often add extra brushes inside the channels to reduce dust leakage.

Faiha is in the Capital governorate near Faiha Park, amid quiet low-density residential areas.

Window openings in Faiha villas typically range from one and a half to two metres in height.

Back to Aluminium shutters

See also: Rolling shutters in Faiha

What the work covers - Aluminium shutters

What the work covers

Measure, fabricate and fit aluminium shutters including drum box, side channels and bottom seal.

  • Measure and fabricate

    Opening measured on site and slats cut to exact width and height.

  • Drum box fitting

    Drum box fixed securely into the wall above the opening.

  • Side channel installation

    Side channels set plumb to give smooth travel and a tight close.

  • Bottom seal

    Rubber bottom seal fitted to block dust, insects and draught.

  • Powder-coat finish

    Electrostatic powder coat in chosen colour, UV and salt resistant.

  • Spring calibration

    Balance spring tensioned so the shutter holds position without dropping.

How it works.

  1. First contact

    Call or WhatsApp us with the opening count and building location.

  2. Site measure

    Our team visits to measure each opening and check lintel and wall condition.

  3. Quotation

    A detailed quote covering slats, drum box, channels, seals and fitting is sent.

  4. Fabrication and fit

    Slats cut to size, channels set plumb, drum box fixed and seals fitted.

  5. Test and handover

    Shutter tested for smooth travel, holding position and tight close before handover.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Aluminium shutters in Faiha

Call now
Do you add extra brushes in the side channels to prevent dust entry?

Yes, we fit flexible foam or rubber brushes inside the side channels to reduce gaps. This is especially important for south and west-facing villas exposed to winds and fine dust.

How much clearance should remain between the bottom of the shutter and the floor?

The bottom seal should contact the floor with light pressure of only a few millimetres. We test it with thin paper that barely passes under the closed shutter.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works