Aluminium shutters in Salhiya
Aluminium shutter installation in Salhiya covers shop fronts and offices on medium-rise building facades. We measure openings precisely and fabricate aluminium drum boxes, side channels and bottom seals from treated extrusions, then fix them with metal brackets anchored into concrete beams.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Most shops and offices in Salhiya are in commercial buildings four to six storeys high, with main facades directly facing the street in wide openings. The aluminium shutter must fit within a limited architectural soffit or slide along stepped side channels according to the opening height. Seasonal humidity and dust require strong surface treatment of the aluminium and tight fixing of bottom seals to prevent water and dust ingress.
Salhiya lies in the Capital governorate, a busy commercial district with Salhiya Commercial Complex and numerous office and retail buildings.
Shop openings in Salhiya typically range from three to five metres wide, requiring robust metal side channels.
What the work covers
Measure, fabricate and fit aluminium shutters including drum box, side channels and bottom seal.
Measure and fabricate
Opening measured on site and slats cut to exact width and height.
Drum box fitting
Drum box fixed securely into the wall above the opening.
Side channel installation
Side channels set plumb to give smooth travel and a tight close.
Bottom seal
Rubber bottom seal fitted to block dust, insects and draught.
Powder-coat finish
Electrostatic powder coat in chosen colour, UV and salt resistant.
Spring calibration
Balance spring tensioned so the shutter holds position without dropping.
How it works.
First contact
Call or WhatsApp us with the opening count and building location.
Site measure
Our team visits to measure each opening and check lintel and wall condition.
Quotation
A detailed quote covering slats, drum box, channels, seals and fitting is sent.
Fabrication and fit
Slats cut to size, channels set plumb, drum box fixed and seals fitted.
Test and handover
Shutter tested for smooth travel, holding position and tight close before handover.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Aluminium shutters
Other services in Salhiya
Questions about Aluminium shutters in Salhiya
Call nowHow can an aluminium shutter be fitted if the opening is very wide?
We design robust metal side channels with appropriate diameters and support them with fixing brackets at regular intervals into the concrete frame. The wider the opening, the more anchor points and side support we add.
Does an aluminium shutter resist water and dust ingress in Salhiya?
Yes if the bottom and side seals are fitted tightly. We use rubber gaskets and surface treatment to prevent corrosion, and drive the bottom seal firmly against the shop floor to close gaps.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps