Aluminium shutters in Anjafa
Aluminium shutter installation in Anjafa covers residential and shop openings with precise measurements and tight bottom seals. We measure each opening, fabricate the drum box and side channels, and test the seal before handover.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Anjafa is an older residential district with apartment blocks and villas of varying heights, and many ground-floor shop units with glass frontages exposed to wind and dust. Aluminium shutters here protect openings from dust, heat and weather, especially on windy days. The side channels must be fixed to concrete or brick walls, and the drum box must be sized precisely to ensure smooth shutter rotation without binding.
Anjafa sits in Hawalli governorate, a residential district of older apartment blocks and villas on medium-sized plots.
Aluminium side channels are fixed to walls at intervals not exceeding 60 centimetres to ensure the shutter does not warp.
What the work covers
Measure, fabricate and fit aluminium shutters including drum box, side channels and bottom seal.
Measure and fabricate
Opening measured on site and slats cut to exact width and height.
Drum box fitting
Drum box fixed securely into the wall above the opening.
Side channel installation
Side channels set plumb to give smooth travel and a tight close.
Bottom seal
Rubber bottom seal fitted to block dust, insects and draught.
Powder-coat finish
Electrostatic powder coat in chosen colour, UV and salt resistant.
Spring calibration
Balance spring tensioned so the shutter holds position without dropping.
How it works.
First contact
Call or WhatsApp us with the opening count and building location.
Site measure
Our team visits to measure each opening and check lintel and wall condition.
Quotation
A detailed quote covering slats, drum box, channels, seals and fitting is sent.
Fabrication and fit
Slats cut to size, channels set plumb, drum box fixed and seals fitted.
Test and handover
Shutter tested for smooth travel, holding position and tight close before handover.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Aluminium shutters
Other services in Anjafa
Questions about Aluminium shutters in Anjafa
Call nowHow is the drum box size chosen for the shutter?
We calculate the drum diameter based on the opening width, aluminium thickness and fold count. Wrong sizing causes binding or slack in rotation.
Why is the bottom seal important in the shutter?
The bottom seal stops dust and wind entering under the closed shutter. We use ribbed rubber or flexible material that adheres to the frame sill and maintains a permanent seal.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps