Marble window sills in Anjafa
Window sill marble installation in Anjafa requires precise measurement of each window opening and cutting to the exact height and depth needed. We bed the marble on the load-bearing walls with cement mortar and finish all joints with water-resistant silicone.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Most residential buildings in Anjafa are single villas and detached houses with large window openings onto the street, and some have double-glazed windows with air gaps between frames. This means the frame depth varies from one opening to another in the same house, so we measure each window individually before cutting. Marble cut to the wrong dimension leaves air pockets under the lower edge, so we use fine levelling mortar and compact carefully to ensure full contact.
Anjafa is in Hawalli governorate, a residential area of villas and detached houses with private gardens.
Standard window openings in Kuwaiti villas range between 1.2 and 1.8 metres wide and 1 to 1.4 metres high per pane.
What the work covers
Measuring, cutting, fixing and sealing each marble sill from survey to handover
Frame and opening check
Width, depth and level of each window opening recorded on site
Slab cutting and profiling
Diamond blade cutting to exact size with front edge profiled as specified
Mortar bed and slab fixing
Full mortar bed with no voids, levelled and pitched for drainage
Silicone edge sealing
Flexible silicone bead along every joint where sill meets frame and wall
Stone impregnation
Penetrating impregnator applied to close pores against staining and moisture
Handover inspection
Level, pitch and joint integrity confirmed before the owner signs off
How it works.
Call or whatsApp
Send photos and window count; we respond promptly to arrange a visit
Site survey
Each opening measured and existing frame condition noted on site
Cutting and shaping
Slabs cut on a wet diamond blade and front edges profiled to spec
Fixing and sealing
Full mortar bed, pitch set, silicone bead run along every perimeter joint
Sealing and handover
Stone impregnated, level and joint integrity checked, then handed over
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Marble window sills
Other services in Anjafa
Questions about Marble window sills in Anjafa
Call nowHow do you measure the window if the aluminium frames are slightly out of plumb?
We measure at least three points: top right, top left and centre, and take the smallest dimension to ensure the marble does not force the frame. Then we level the mortar bed below before setting the marble.
Do you put a barrier between the marble and the aluminium frame or do they touch directly?
We place a black or grey butyl tape between the marble and the aluminium frame to prevent galvanic corrosion, then seal the gap with water and UV-resistant silicone.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps