Bathroom marble in Anjafa
Bathroom marble installation in Anjafa requires strong waterproofing beneath the stone, since most residential units in the area were built two decades ago and drainage systems are older. We start by prepping the surface and laying waterproof membranes, then bed the marble in wet mortar, and finish with joint grouting and sealing.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Anjafa has older villas and apartment blocks on medium-sized plots, with small, simple bathrooms. Damp soil and proximity to drainage lines mean moisture seeps up from floors and walls easily, especially in bathrooms under constant spray. Full waterproofing is essential before any stone goes down, sub-floor drainage channels must be installed just before marble is laid, and joints must be filled with antifungal silicone.
Anjafa is in Hawalli governorate, an older residential district of villas and mid-rise blocks on relatively narrow plots.
Most bathrooms in Anjafa are 2 to 3 square metres, and require waterproofing on the floor and walls to at least 1.5 metres height.
What the installation covers
Starting from waterproofing substrate through to stone impregnation and joint inspection.
Waterproofing layer
Membrane applied to floor and wall base before any stone is fixed.
Substrate preparation
Walls and floors levelled and stripped of any failing old finish.
Marble cutting and shaping
Water-cooled diamond saw cutting with edge profiling and drain openings.
Slab fixing
Full mortar bed for floors and flexible adhesive mortar for walls.
Grouting and silicone
Flexible moisture-resistant grout and anti-mould silicone at all corners.
Impregnation and handover
Penetrating stone impregnator applied, then every joint checked before handover.
How it works.
First contact
Call or WhatsApp us and share bathroom photos and dimensions.
Site survey
We visit to measure precisely and assess the condition of existing surfaces.
Quote and stone selection
We submit a priced quote with marble samples for your approval.
Installation
Strip old finish, apply membrane, fix marble, grout and seal all joints.
Handover
Impregnate the stone, inspect every joint and hand over ready for use.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Bathroom marble
Other services in Anjafa
Questions about Bathroom marble in Anjafa
Call nowHow do we prevent water leakage from an old villa bathroom in Anjafa?
We remove the old marble and mortar, inspect the concrete floor for cracks, then apply two coats of waterproof membrane before setting new marble in fresh-mixed wet mortar.
Do the joints between marble tiles need special treatment in Anjafa bathrooms?
Yes, joints are weak points. We fill them with antifungal silicone instead of plain grout, because high moisture and damp soil under the bathroom make fungal growth easier.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps