Gypsum partitions in Zahraa
Straight gypsum partitions in Zahraa divide residential units and shops on standard-depth plots. We first mark the service routes and pipes, then install the metal frame, board and joints to deliver a paint-ready surface.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Zahraa has medium-rise apartment buildings and units on regular-depth plots with standard air conditioning and electrical runs. When installing gypsum partitions, we map service and electrical routes before framing to avoid random cutting and drilling. The metal stud is fastened to the floor, ceiling and bearing walls with screws, and gypsum boards are glued and screw-fixed. Joints between boards are filled with compound and sanded smooth, reducing rework during painting.
Zahraa lies in Hawalli governorate, a residential district of medium-rise apartment buildings on regular plots near shopping centres.
Straight gypsum partition studs are typically 75 mm or 100 mm, depending on height and anticipated load.
What the work covers
Marking out routes and services, then framing, boarding and full jointing to a paint-ready surface.
Layout and marking
Marking partition lines on floor and ceiling before any framing begins.
Galvanised steel frame
Fitting floor tracks and stud uprights at correct centres for rigidity.
Services routing
Coordinating electrical conduit and plumbing runs inside the partition before boarding.
Board fixing
Two board faces fixed to the frame with countersunk screws for a flat surface.
Taping and jointing
Fibre tape on every joint with multi-coat filler to prevent cracking.
Paint-ready finish
Sanding and surface treatment until the partition accepts primer and paint directly.
How it works.
First contact
Call or WhatsApp with a brief description of where the partitions are needed and why.
Site visit
We visit to measure, check services routing and confirm the right board specification.
Quotation
A detailed quote covering framing, board, jointing finish and any embedded services.
Installation
Setting out centrelines, fixing the frame, boarding both faces and building up joint coats.
Handover
Final sanding, plumb and flat check, then surface handed over ready for primer.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Gypsum partitions
Other services in Zahraa
Questions about Gypsum partitions in Zahraa
Call nowHow do you avoid cutting AC pipes when installing partitions?
We map all pipes and electrical routes before the metal frame goes up, and position the partition to pass beside those runs. If crossing is unavoidable, we get the site engineer's approval before drilling.
Is the gypsum surface ready for paint straight after jointing is done?
Yes, after filling joints with compound and fine sanding, the surface is flat and paint-ready. A light primer coat may be applied depending on the paint type.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps