Wall breaking in Kuwait - Yarmouk

Wall breaking in Yarmouk

Wall breaking in Yarmouk serves the subdivision and expansion of residential apartments without weakening the building structure. We conduct a full services survey, then cut sized openings precisely and clear the site cleanly.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Yarmouk residential buildings are mid-rise towers, 4 to 8 storeys on medium plots, with internal walls of lightweight concrete or brick, 10 to 15 cm thick. When opening passages between units or expanding halls, we check for hidden columns or short beams under the wall using metal detectors. The area is densely populated, so we coordinate with management on work hours and isolate shared water and electrical supplies before breaking.

Yarmouk sits in the Capital governorate, an area of mid-rise residential buildings on regular plots.

Most partition walls in Yarmouk buildings are 10 cm lightweight concrete or 12 cm brick, non-load-bearing on upper floors.

Back to Wall breaking

See also: Demolition & removal in Yarmouk

What the work covers - Wall breaking

What the work covers

Breaking internal walls from initial survey through to a clean, squared opening ready for finishing

  • Full partition removal

    Full block partition taken down keeping columns and slab intact

  • Partial wall opening

    Door or window opening cut into an existing wall with straight edges

  • Hidden services survey

    Locating electrical and plumbing lines before breaking starts

  • Dust and area containment

    Sheeting off adjacent rooms to stop breaking dust spreading

  • Block breaking method

    Hammer drill or disc cutter selected to suit wall thickness and block type

  • Opening edge finishing

    Edges chased and levelled ready for lintel or plaster finish

How it works.

  1. First contact

    Call or WhatsApp us and describe the wall to be broken

  2. Site survey

    We visit, check wall type, hidden services and surrounding conditions

  3. Prep and containment

    Adjacent openings sealed and floors protected before any breaking starts

  4. Breaking and clearing

    Wall broken with the correct tool and rubble collected immediately

  5. Final handover

    Edges dressed, site cleaned, and opening handed over ready for finishing

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Wall breaking in Yarmouk

Call now
Can we cut an opening between two adjacent units in a 6-storey building?

Yes, if the partition wall does not carry loads from above. We conduct a full scan to confirm no hidden columns or beams, then set the opening dimensions precisely before breaking.

Is there a risk of drainage leaks during wall breaking?

Possible, if horizontal drainage pipes run inside or near the wall. Before breaking, we use metal detectors and ultrasound to locate these pipes, and coordinate with the plumber to stop flow temporarily if needed.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works