Central AC design in Salhiya
Central AC design in Salhiya starts with precise heat-load surveys for each building zone, linking the figures to duct routes, unit sizing and grille placement. We draw the network based on actual load per space and heat gains from glazed façades and interior equipment.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Most commercial and residential buildings in Salhiya rise through multiple storeys with tall ceilings and glazed façades exposed to direct summer sun. This means high and uneven heat loads between upper and lower floors and between corners and core areas. We calculate the load for each building section and select AC units, fans and ducts to ensure balanced distribution without excess or shortfall. We also position supply and return grilles so airflow is even throughout each room.
Salhiya is in the Capital governorate, a mixed commercial and residential district with hotels and offices around the Salhiya Commercial Complex.
Most office towers in Salhiya reach 10 to 20 storeys, requiring the thermal load to be split across multiple units and intermediate fans.
What the design covers
Detailed drawings that link heat-load figures to duct routes, unit sizes and grille positions
Heat load calculation
Room-by-room cooling output needed based on area and exposure
System type selection
Choosing between fully ducted and concealed fan-coil layouts
Duct routes and ceiling voids
Mapping every duct run through the available ceiling void depth
Grille positions
Supply and return grille locations laid out for even room coverage
Outdoor unit sizing
Outdoor unit capacity matched to calculated loads, not guesswork
Coordination with gypsum works
Duct layout aligned with gypsum ceiling design to avoid clashes
How it works.
Call or whatsApp
Describe the building, its area and the system type you have in mind
Site survey
We measure ceiling voids, check facade orientation and note any obstacles
Load calculations
Room-by-room heat gain figures calculated from survey data
Drawing preparation
Duct routes, sizes and grille positions drawn on dimensioned CAD plans
Review and handover
Drawings reviewed with you, comments addressed and final set handed over
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Central AC design
Other services in Salhiya
Questions about Central AC design in Salhiya
Call nowHow do you handle the large difference between upper and lower floor loads?
We survey the heat load for each floor separately, with special calculation for glazed surfaces and sun exposure. We select separate units or intermediate fans to distribute cooling evenly without excessive temperature difference between the first and twentieth floor.
Does AC design need separate drawings for corner and core zones?
Yes. Corners and glazed façades carry higher heat load, so we design dedicated duct networks and grille layouts for them. Core and interior zones with lower load get smaller units to achieve balance.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps