Central AC design in Doha
AC design in Doha starts with precise heat-load calculation on each building face and window exposure. Execution drawings link load figures to duct routes, unit sizing and grille placement to ensure balanced cooling throughout.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Doha buildings range from three-storey villas to apartment blocks and offices on plots of 400 to 600 square metres, many facing south and west with large windows and glass facades. That exposure raises peak-hour heat loads, so design must separate thermal zones clearly and distribute indoor units to match room counts. The density of buildings in some Doha districts also means duct routes must align with neighbouring structures before final drawings are signed off.
Doha sits in the Capital governorate, the central district near Fifth Ring Road and the waterfront.
Most residential buildings in Doha need thermal zones split into at least three areas to achieve even cooling distribution.
What the design covers
Detailed drawings that link heat-load figures to duct routes, unit sizes and grille positions
Heat load calculation
Room-by-room cooling output needed based on area and exposure
System type selection
Choosing between fully ducted and concealed fan-coil layouts
Duct routes and ceiling voids
Mapping every duct run through the available ceiling void depth
Grille positions
Supply and return grille locations laid out for even room coverage
Outdoor unit sizing
Outdoor unit capacity matched to calculated loads, not guesswork
Coordination with gypsum works
Duct layout aligned with gypsum ceiling design to avoid clashes
How it works.
Call or whatsApp
Describe the building, its area and the system type you have in mind
Site survey
We measure ceiling voids, check facade orientation and note any obstacles
Load calculations
Room-by-room heat gain figures calculated from survey data
Drawing preparation
Duct routes, sizes and grille positions drawn on dimensioned CAD plans
Review and handover
Drawings reviewed with you, comments addressed and final set handed over
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Central AC design
Other services in Doha
Questions about Central AC design in Doha
Call nowHow do you calculate heat load for a villa with large west-facing windows?
We measure the facade and glazing area, thermal insulation type and solar intensity per hour, then add occupancy and appliance load. The result determines outdoor unit size, number of indoor units and duct dimensions.
Do apartment buildings need separate drawings for each floor or one drawing for the whole building?
Each floor needs its own drawing because loads and areas differ, especially between ground and upper floors. We plot main duct routing and unit distribution based on each apartment location and its window positions.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps