Central AC design in Farwaniya
AC design in Farwaniya balances high cooling loads from spacious apartments with tight service corridors in residential buildings. We draw precise duct routes and coordinate unit sizes with grille distribution to achieve balanced cooling throughout.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Farwaniya is a district of multi-storey apartment buildings with medium to large units on limited plots, tight shared service corridors and low suspended ceilings. High summer temperatures increase cooling loads, especially for units with sunny south and east facades. The design plan must specify separate duct routes for each apartment, with supply and return grilles positioned to avoid cross-talk between units and common corridors.
Farwaniya is in Farwaniya governorate, a district of dense apartment buildings near Farwaniya Hospital.
Cooling ducts in apartment buildings must be routed separately for each unit and avoid common corridors to prevent air mixing between apartments.
What the design covers
Detailed drawings that link heat-load figures to duct routes, unit sizes and grille positions
Heat load calculation
Room-by-room cooling output needed based on area and exposure
System type selection
Choosing between fully ducted and concealed fan-coil layouts
Duct routes and ceiling voids
Mapping every duct run through the available ceiling void depth
Grille positions
Supply and return grille locations laid out for even room coverage
Outdoor unit sizing
Outdoor unit capacity matched to calculated loads, not guesswork
Coordination with gypsum works
Duct layout aligned with gypsum ceiling design to avoid clashes
How it works.
Call or whatsApp
Describe the building, its area and the system type you have in mind
Site survey
We measure ceiling voids, check facade orientation and note any obstacles
Load calculations
Room-by-room heat gain figures calculated from survey data
Drawing preparation
Duct routes, sizes and grille positions drawn on dimensioned CAD plans
Review and handover
Drawings reviewed with you, comments addressed and final set handed over
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Central AC design
Other services in Farwaniya
Questions about Central AC design in Farwaniya
Call nowHow do we design AC for a south-facing sunny apartment in a residential building?
We increase the heat-load calculation for that facade to account for direct solar gain, then place additional supply grilles or larger-diameter ducts toward that side. The design drawing shows grille distribution and duct sizes matched to that higher load.
Can we divide one apartment into separate cooling zones?
Yes, if the unit is very large or has a complex layout. We use separate ducts and distributed grilles for each zone, with independent heat-load calculations. The design specifies duct diameters and grille counts for each zone.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps