Polyurethane foam insulation in Anjafa
Polyurethane foam insulation in Anjafa protects residential apartments from intense summer heat and humidity. We inspect surfaces, apply a flexible foam layer, then finish with a durable protective coat that lasts years.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Anjafa consists of medium-height apartment blocks on regular plots, most built in the 1970s and 1980s without original thermal insulation. Exposed roofs and exterior walls absorb heat rapidly, and humidity from air conditioning units adds stress to concrete frames. Polyurethane foam installation requires cleaning the surface of dust and mould first, then filling any cracks with a bonding compound before spraying, to ensure strong adhesion between the foam and the concrete substrate.
Anjafa is in Hawalli governorate, a relatively older residential district requiring thermal improvement for its exposed concrete buildings.
Foam application requires specific climate conditions: temperature between 5 and 35 degrees Celsius and humidity below 85 per cent for proper curing.
What the work covers
Inspection and surface prep through foam application and a durable protective finish coat
Surface inspection
Check for cracks, voids and old insulation remnants before spraying
Substrate preparation
Clean, dry and remove loose material so foam bonds firmly
Foam spraying
Apply closed-cell polyurethane foam at the specified thickness in one pass
Joint and edge sealing
Seal parapet edges, drain outlets and all pipe penetrations carefully
Protective top coat
Cover cured foam with a UV-resistant coating to prevent surface degradation
Post-application check
Verify thickness and full coverage across the entire treated surface
How it works.
Contact us
Call or WhatsApp to describe the area and book a site visit
Site inspection
Inspect the surface, measure the area and assess the substrate condition
Quotation
Submit a quote specifying thickness, materials, top coat and total cost
Prep and spray
Prepare the surface, spray foam, seal edges and apply the protective coat
Check and handover
Verify coverage and thickness, then hand over once the work is confirmed complete
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Polyurethane foam insulation
Other services in Anjafa
Questions about Polyurethane foam insulation in Anjafa
Call nowDoes polyurethane foam work on old cracked surfaces?
Yes, but we first clean the surface and fill cracks with a bonding compound before spraying the foam. This ensures strong adhesion and prevents moisture seeping beneath the foam layer.
How many foam coats does a roof surface need?
Usually one coat 5 to 10 centimetres thick is sufficient, but we determine thickness based on required thermal protection and direct sun exposure. A protective topcoat then shields the foam from ultraviolet damage.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps