Heat-reflective coating in Jaber Al-Ahmad City
Heat-reflective coating in Jaber Al-Ahmad City cuts interior temperatures on new residential buildings by reflecting solar radiation away from the roof and outer walls. We prepare the surface, prime it, and apply the reflective coat to roofs, parapets and exterior walls.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Jaber Al-Ahmad City comprises modern multi-storey residential buildings on regular plots, many built in recent years to current standards. The roofs are exposed and face direct sunlight for long hours, raising summer interior temperatures sharply. Applying heat-reflective coating to these roofs and south and west-facing walls requires thorough cleaning to remove dust and residue, then priming with a base coat before spraying the reflective paint in the number of coats specified by the manufacturer's data sheet.
Jaber Al-Ahmad City lies in the Capital governorate, a planned modern residential city with regular plots and wide streets.
Heat-reflective coating application requires surface temperature below 40 degrees Celsius and wind speed not exceeding 20 kilometres per hour.
What the work covers
Surface preparation through final reflective coat on roofs, parapets and exterior walls.
Surface inspection
Assess slab or tile condition before any coating is applied.
Cleaning and priming
Remove dust, grease and loose material, then apply the correct primer.
Roof reflective coat
Multi-layer reflective coating over the full horizontal roof deck.
Facade treatment
Reflective coat on sun-exposed exterior walls and parapets.
Joints and edge sealing
Seal roof perimeter joints and penetration collars before coating.
Final inspection
Check for uniform coverage with no bubbles, pinholes or missed spots.
How it works.
Get in touch
Call or WhatsApp us to describe the surface and arrange a visit.
Site inspection
We assess surface condition, cracks, access needs and coating requirements.
Quotation
We submit a detailed quote covering materials, coats and total area.
Preparation and application
Clean, prime, then apply reflective coats to the specified thickness.
Handover check
We verify full coverage and no defects before signing off.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Heat-reflective coating
Other services in Jaber Al-Ahmad City
Questions about Heat-reflective coating in Jaber Al-Ahmad City
Call nowDo you coat both old and new concrete roofs, or new ones only?
We coat both new and existing roofs. We clean the surface thoroughly and remove any flaking old paint, then apply primer and reflective coats based on the surface condition.
How many layers of reflective coating does a roof need?
Typically two to three coats are sufficient depending on the coating specification and substrate condition. Each coat dries in 4 to 6 hours, and we wait for full cure before the roof is used.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps