Pharaonic stone cladding in Kuwait - Mansouriya

Pharaonic stone cladding in Mansouriya

Pharaonic stone cladding in Mansouriya covers modern apartment blocks with cast-in-place concrete walls. We prepare the surface, fix the stone with metal frameworks, point it with heat-resistant mortar, and seal it.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Mansouriya has seven- to ten-storey residential blocks on modern concrete, with AC voids and exterior pipes on the facades. Pharaonic stone on concrete requires careful checking for hairline cracks and fractures, then cleaning and filling them. We use pozzolana-based mortar for heat and expansion resistance, and point to at least six millimetres depth. Spacing between stone and pipes must be clear to avoid moisture trapping.

Mansouriya is in the Capital governorate on Fourth Ring Road, where modern residential buildings have solid concrete walls.

Cast-in-place concrete in Mansouriya requires alkaline treatment to ensure pharaonic stone adhesion is secure.

Back to Pharaonic stone cladding

See also: Stone & facades in Mansouriya

What the service covers - Pharaonic stone cladding

What the service covers

Wall survey and preparation through to a fully pointed and sealed pharaonic stone facade

  • Wall survey and prep

    Check wall level and assess substrate condition before any panel goes up

  • Panel cutting and shaping

    Precise cuts for corners, window reveals and any irregular wall break

  • Fixing by anchor or mortar

    Fixing method chosen by panel weight, wall type and facade height

  • Expansion joints and pointing

    Correct gap spacing filled with flexible sealant to absorb thermal movement

  • Salt-resistant sealing

    Impregnating treatment on stone face to block coastal moisture and salt deposit

  • Final inspection and handover

    Tap-test every panel and check all joints before handing the facade over

How it works.

  1. Call or whatsApp

    Tell us the building location and which facades need cladding

  2. Site survey

    We measure the facades, check wall condition and assess access needs

  3. Quote and approval

    Detailed quote covering stone, fixing, pointing and sealing is submitted

  4. Installation

    Wall prep, panel fixing, joint pointing and surface sealing are carried out

  5. Inspection and handover

    Full tap-test and joint check done before the facade is handed over

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Pharaonic stone cladding in Mansouriya

Call now
Can pharaonic stone be fixed to old concrete in a residential building?

Yes, but the surface must be checked and cleaned deeply and any cracks filled. We test adhesion strength with dynamic tools and apply a resin primer if needed.

How deep should pointing be between pharaonic stones on an east-facing facade?

At least six millimetres to absorb thermal expansion from the eastern sun. We fill with pozzolana mortar at recommended ratio and smooth with a metal jointer to shed water.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works