Floor-to-floor soundproofing in Kuwait - Farwaniya

Floor-to-floor soundproofing in Farwaniya

Floor-to-floor soundproofing in Farwaniya blocks impact and furniture noise from the storey above. We examine vibration transmission through the concrete, and build isolation layers with sound-absorbing finishes.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Farwaniya is a dense residential area with apartment blocks of varying height, from five to ten storeys. The concrete slabs vary in thickness and strength depending on construction period and code applied. Older designs have hollow or solid slabs with no original sound isolation. Work here requires a careful survey of the existing slab's condition before deciding on isolation layer thickness and material.

Farwaniya sits in Farwaniya governorate, a dense residential area near Farwaniya Hospital and the Third Ring Road.

Most residential slabs in Farwaniya are 20 to 25 centimetres thick and may need a 7 to 10 centimetre isolation layer to meet sound isolation targets.

Back to Floor-to-floor soundproofing

See also: Sound insulation in Farwaniya

What the work covers - Floor-to-floor soundproofing

What the work covers

Survey impact paths through the slab, then install decoupling layers and finished surfaces

  • Impact path survey

    Locate where impact noise travels through the slab and columns

  • Resilient underlay layer

    Dense resilient mat installed between the slab and the floating screed

  • Floating floor build-up

    Compression screed poured over the mat without rigid contact with walls

  • Perimeter isolation strip

    Resilient strip around the room perimeter blocks vibration transfer through the wall base

  • Decoupled ceiling below

    Suspended ceiling hung on resilient channels breaks the downward vibration path

  • Post-installation check

    Impact tap test confirms direct sound paths are sealed before handover

How it works.

  1. Call or whatsApp

    Describe the affected floor and noise type to book the site visit

  2. Site survey

    We inspect the slab, existing floor and map the impact transmission paths

  3. Quotation

    You receive a detailed quote covering materials, method and work schedule

  4. Layer installation

    Resilient mat, floating screed, perimeter strip and ceiling work installed to spec

  5. Test and handover

    Impact tap test confirms sound paths are closed before final handover

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Floor-to-floor soundproofing in Farwaniya

Call now
Can an older uninsulated unit be soundproofed from below?

The primary method is raising the floor from above with isolation layers. Insulating from below is possible but depends on available space under the ceiling and approval from the unit below.

How long does soundproofing take in a medium-sized unit?

Duration depends on unit size and number of rooms and furniture clearance. Survey, preparation, installation and finishing are sequential and coordinated with the unit's schedule.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works