Waterproof coating in Sabah Al-Ahmad City
Liquid waterproof coating on Sabah Al-Ahmad City roofs protects new concrete surfaces from water infiltration and moisture damage before final handover. Substrate cleaning, crack repair, and multi-coat application ensure lasting adhesion and prevent future cracking.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Sabah Al-Ahmad City comprises modern villas and residential apartment blocks on a uniform grid with exposed concrete roofs and overhead utilities. Roofs here endure intense heat and climate fluctuations, and fresh concrete retains high moisture content after casting. Before coating, we clean the entire surface of dust, salts and efflorescence, then repair any hairline cracks or open pores with epoxy filler. Application proceeds in multiple coats with timed intervals to achieve the required membrane thickness.
Sabah Al-Ahmad City lies in Ahmadi governorate on the Persian Gulf coast, where roofs are exposed to salt-laden winds and high humidity.
We apply the waterproof membrane to a minimum thickness of 1.5 millimetres after the substrate has dried completely from casting moisture.
What the work covers
Substrate cleaning, crack repair and multi-coat application of liquid waterproof coating.
Surface inspection
Locating cracks, open pores and any spalling before work starts.
Cleaning and decontamination
Removing dust, oils and old loose layers for proper coating adhesion.
Crack filling
Sealing hairline and wider cracks with flexible repair mortar before coating.
Primer coat
A penetrating primer that anchors the waterproof coating into the concrete substrate.
Waterproof coating coats
Applying at least 2 cross-direction coats for uniform thickness and full coverage.
Corners and drain sealing
Reinforcing vulnerable junctions at corners, drain collars and window sills.
How it works.
Contact us
Call or WhatsApp us and send photos of the affected surface.
Site assessment
We visit to measure the area and assess concrete and existing coating condition.
Surface preparation
Cleaning, crack repair and applying the bonding primer coat.
Coating application
Applying waterproof coating coats with reinforced corners and drain details.
Handover check
Checking coverage, coat thickness and full cure before handing over.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Waterproof coating
Other services in Sabah Al-Ahmad City
Questions about Waterproof coating in Sabah Al-Ahmad City
Call nowHow many coats are needed to seal a new concrete roof?
Typically three coats minimum, each applied after the previous one has fully cured. The final thickness must reach at least 1.5 millimetres to ensure water does not penetrate under pressure and heat exposure.
Must cracks be repaired before applying the waterproof layer?
Yes, all cracks and open pores are filled with epoxy filler before coating. Water can penetrate through hairline cracks and undermine the waterproof layer's effectiveness.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps