Motorised shutters in Kuwait - Qibla

Motorised shutters in Qibla

Motorised shutter control in Qibla automates electric operation and programming of motors on shop fronts, offices and storage gates. We install the motor, gearbox and electrical wiring to safety and insulation standards, then programme the control unit for instant response from any control point.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Qibla is a mixed commercial and office district with shops, work spaces and storage units along Gulf Street and side streets, each needing an iron shutter with an electric motor for fast, secure closure. Motors are sized by the required lifting force and opening area, and wired to separate electrical breakers for each shutter with overload protection. Programming includes manual switches and a wireless or centralised control unit, plus safety sensors mounted to stop the motor if an obstacle blocks the path.

Qibla sits in Kuwait's Capital governorate, a central commercial district near Gulf Street and Commercial Bank of Kuwait.

Most shutter openings in Qibla range from 2 to 4 metres wide, requiring lift motors of 150 to 300 watts capacity.

Back to Motorised shutters

See also: Rolling shutters in Qibla

What the installation covers - Motorised shutters

What the installation covers

Motor supply, electrical wiring, control unit setup and programming for each opening.

  • Motor supply

    Tubular motor sized to the shutter weight and opening width.

  • Electrical wiring

    Concealed cable run from the distribution board to each motor.

  • Control unit

    Wall switch and remote handset fitted and paired per shutter.

  • Timer programming

    Daily open-close schedule programmed into the control unit.

  • Travel limits

    Upper and lower stop limits set precisely for each shutter.

  • Manual conversion

    Replacing the manual axle with a tubular motor, keeping existing slats.

How it works.

  1. First contact

    Call or WhatsApp us with the opening count and photos of existing shutters.

  2. Site survey

    Site visit to measure openings, check shutter condition and plan cable routes.

  3. Quotation

    Detailed quote covering motors, electrical works and chosen control type.

  4. Installation

    Motors fitted, cables routed and concealed, control units installed.

  5. Commissioning

    Travel limits set, timer programmed and remotes handed over to the owner.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Motorised shutters in Qibla

Call now
Can one control point operate shutters across several different openings?

Yes, by installing a centralised control unit and programming each motor with a unique ID number. The control unit receives commands from switches or a wireless remote and sends them to each shutter as needed.

What happens if something blocks the shutter while it is closing?

We mount pressure sensors or motion detectors at the shutter edge. When an obstacle is detected, the sensor cuts power to the motor immediately and the shutter stops.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works