Marble basins in Kuwait - Qadisiya

Marble basins in Qadisiya

Marble basins in Qadisiya are installed on internal supports in medium to large residential flats with isolated, secure bathrooms. We measure the cavity against existing pipes, cut and profile tap holes, and seal everything against moisture before handover.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Most flats in Qadisiya were built in the 1980s and 1990s with controlled humidity in bathrooms and kitchens, and thick concrete walls strong enough for heavy marble basins. Space is tight, so we measure the cavity precisely to avoid cramping the tap or drain area. Each basin needs a check of the support underneath and confirmation of no old moisture before fixing, because any trapped water under the stone will damage the wall later.

Qadisiya sits in Capital governorate near Kuwait Sports Club and Qadisiya Co-operative Society.

Most basins in Qadisiya need metal or wooden supports backed by fixings anchored into concrete at least 8 cm deep.

Back to Marble basins

See also: Marble & granite in Qadisiya

What the installation covers - Marble basins

What the installation covers

Basin support measurement through stone cutting, fixing, tap-hole profiling and sealed handover.

  • Support measuring

    Precise measurement of the cabinet or pedestal before any cutting.

  • Slab cutting and shaping

    Wet diamond-blade cutting and front edge profiling to the required shape.

  • Basin and tap holes

    Circular core drilling to prevent cracking around basin or tap openings.

  • Mortar bed fixing

    Full mortar coverage under the slab with no voids under basin weight.

  • Silicone edge sealing

    Anti-mould silicone seals every joint between stone, basin and wall.

  • Sealing and final check

    Stain impregnator applied and level and joint tightness verified before handover.

How it works.

  1. Call or whatsApp

    Call or WhatsApp us and share a photo of the existing basin or cabinet.

  2. Site measure and check

    Site visit to measure the support, check the wall condition and drain position.

  3. Stone selection

    We present suitable stone samples and you choose the type and edge profile.

  4. Cutting and fixing

    Slab cut, basin and tap holes core-drilled, then full mortar bed fixing.

  5. Seal and handover

    Stain impregnator applied, anti-mould silicone sealed at joints and basin handed over ready for use.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Marble basins in Qadisiya

Call now
Can a marble basin be installed over an old basin without removing the old base?

No, the old base must be removed and the wall and concrete beneath inspected for moisture or cracking. Adding new marble over a damp old base will cause seepage and damage later.

What minimum clearance is needed between the tap and the basin edge?

At least 10 cm to prevent water spray outside the bowl. We measure this when the pipes are fixed and profile the tap hole according to the exact position of the supply and spout.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works