Bathroom marble in Sabah Al-Ahmad City
Bathroom marble installation in Sabah Al-Ahmad City requires strong waterproofing first, since the modern buildings here have complex drainage systems and floors exposed to constant moisture. We bed the marble on approved waterproof layers and seal joints with flexible silicone to prevent water ingress.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Most housing units in the new city are modern apartment blocks with spacious, high-finish bathrooms and concrete floors treated against moisture. Before laying marble, we inspect the base waterproof layer for cracks and voids, then spread a thin, tight cement coat across the entire surface. We then cut the marble to the bathroom's dimensions and bed it with flexible adhesive, finishing by cleaning and inspecting every joint before final sealing with a water-resistant compound.
Sabah Al-Ahmad City lies in Ahmadi governorate, a planned coastal development with modern residential buildings and advanced service systems.
Bathrooms in the new city have integrated floor drains, so the entire floor must be waterproofed before any marble goes down.
What the installation covers
Starting from waterproofing substrate through to stone impregnation and joint inspection.
Waterproofing layer
Membrane applied to floor and wall base before any stone is fixed.
Substrate preparation
Walls and floors levelled and stripped of any failing old finish.
Marble cutting and shaping
Water-cooled diamond saw cutting with edge profiling and drain openings.
Slab fixing
Full mortar bed for floors and flexible adhesive mortar for walls.
Grouting and silicone
Flexible moisture-resistant grout and anti-mould silicone at all corners.
Impregnation and handover
Penetrating stone impregnator applied, then every joint checked before handover.
How it works.
First contact
Call or WhatsApp us and share bathroom photos and dimensions.
Site survey
We visit to measure precisely and assess the condition of existing surfaces.
Quote and stone selection
We submit a priced quote with marble samples for your approval.
Installation
Strip old finish, apply membrane, fix marble, grout and seal all joints.
Handover
Impregnate the stone, inspect every joint and hand over ready for use.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Bathroom marble
Other services in Sabah Al-Ahmad City
Questions about Bathroom marble in Sabah Al-Ahmad City
Call nowHow do you ensure no water leaks from under the bathroom marble?
We inspect the base waterproof layer first, then apply a tight cement coat and flexible adhesive that absorbs marble movement. Joints are sealed with flexible silicone that blocks water entry from the sides.
Do you inspect the marble after installation for cracks or voids?
Yes, once the adhesive is fully set we inspect each stone for cracks and confirm all edges are bonded. Any small void is filled with silicone before final sealing.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps