Bathroom marble in NW Sulaibikhat
Bathroom marble installation in NW Sulaibikhat requires careful attention to waterproofing and solid bedding on wet substrates. We prepare the flat base, treat it with sealants, then set marble with epoxy or white cement adhesive to ensure water does not seep beneath the stone.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Most properties in NW Sulaibikhat are new-build villas and mid-age apartment blocks with small to medium indoor bathrooms. These spaces face high humidity and repeated leaks if sealing is not thorough, so we apply waterproof membrane using liquid bitumen or flexible sheets on the floor and walls up to half a metre above the bathtub rim. Once the membrane is fully dry we bed the marble on an even adhesive layer and tamp each stone with a rubber mallet to push out trapped air. We fill the joints between slabs with epoxy grout that seals tight, then finish the surface with natural oil or impregnator.
NW Sulaibikhat is in the Capital governorate, a district of villas and apartments with indoor bathrooms that require precise waterproofing.
We apply a waterproof membrane of at least two millimetres thickness before any marble is set on bathroom floors.
What the installation covers
Starting from waterproofing substrate through to stone impregnation and joint inspection.
Waterproofing layer
Membrane applied to floor and wall base before any stone is fixed.
Substrate preparation
Walls and floors levelled and stripped of any failing old finish.
Marble cutting and shaping
Water-cooled diamond saw cutting with edge profiling and drain openings.
Slab fixing
Full mortar bed for floors and flexible adhesive mortar for walls.
Grouting and silicone
Flexible moisture-resistant grout and anti-mould silicone at all corners.
Impregnation and handover
Penetrating stone impregnator applied, then every joint checked before handover.
How it works.
First contact
Call or WhatsApp us and share bathroom photos and dimensions.
Site survey
We visit to measure precisely and assess the condition of existing surfaces.
Quote and stone selection
We submit a priced quote with marble samples for your approval.
Installation
Strip old finish, apply membrane, fix marble, grout and seal all joints.
Handover
Impregnate the stone, inspect every joint and hand over ready for use.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Bathroom marble
Other services in NW Sulaibikhat
Questions about Bathroom marble in NW Sulaibikhat
Call nowWhat is the difference between epoxy and white cement for marble bedding?
Epoxy is stronger and more moisture-resistant, suited to heavily used bathrooms. White cement is cheaper and sufficient for standard bathrooms if the waterproof membrane below is strong.
How do you ensure water does not seep under the marble in the bathroom?
We apply sealant across the entire surface, bed the marble on an even adhesive layer of adequate thickness, and tamp each stone firmly. We then fill joints with tight epoxy grout and test drainage below the bathtub before handover.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps