Bathroom marble in Eqaila
Bathroom marble installation in Eqaila relies on solid bedding of floors and walls exposed to water and moisture in residential and commercial units. We control mortar thickness and joint gaps, and seal each unit with an impermeable sealant finish.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Eqaila features mid-rise residential buildings of 4 to 10 storeys with family apartments and modest bathroom sizes, plus small commercial buildings and shops. Most construction here dates from 15 to 25 years ago, and some walls show signs of old seepage or periodic moisture. Before laying marble we clean the substrate thoroughly and re-plaster if needed, and use thick cement mortar, 15 to 20 mm, to ensure solid bedding and compensate for any unevenness in the wall or floor.
Eqaila sits in Ahmadi governorate, a mixed residential and commercial district of older-stock buildings near the Eqaila shopping area.
We apply 15 to 20 mm thick cement mortar beneath marble to ensure bonding and levelling in older buildings.
What the installation covers
Starting from waterproofing substrate through to stone impregnation and joint inspection.
Waterproofing layer
Membrane applied to floor and wall base before any stone is fixed.
Substrate preparation
Walls and floors levelled and stripped of any failing old finish.
Marble cutting and shaping
Water-cooled diamond saw cutting with edge profiling and drain openings.
Slab fixing
Full mortar bed for floors and flexible adhesive mortar for walls.
Grouting and silicone
Flexible moisture-resistant grout and anti-mould silicone at all corners.
Impregnation and handover
Penetrating stone impregnator applied, then every joint checked before handover.
How it works.
First contact
Call or WhatsApp us and share bathroom photos and dimensions.
Site survey
We visit to measure precisely and assess the condition of existing surfaces.
Quote and stone selection
We submit a priced quote with marble samples for your approval.
Installation
Strip old finish, apply membrane, fix marble, grout and seal all joints.
Handover
Impregnate the stone, inspect every joint and hand over ready for use.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Bathroom marble
Other services in Eqaila
Questions about Bathroom marble in Eqaila
Call nowCan bathroom marble be installed in an older building without dismantling walls?
Yes, if the substrate is sound. We clean the wall, apply bonding primer, then set marble in thick mortar. If there is old seepage, we clean and re-plaster it first.
How many joints are needed in Eqaila bathroom marble?
It depends on bathroom size and tile dimensions. Typically we leave a 3 to 5 mm gap between each piece, then fill with flexible sealant to allow natural movement and prevent seepage.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps