Gypsum partitions in Naeem
Straight gypsum partitions in Naeem are installed in modern villas and apartment blocks to divide rooms. We mark service routes and utilities, then install metal frames and finish panels and joints for paint.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Naeem is a residential district with medium villas and apartment blocks of 3 to 5 storeys with relatively modern designs. Most villas are built on plots of 500 to 750 square metres, and apartments distribute units across multiple floors. Projects here are mostly internal divisions of new villas or adaptations for new residents. Concrete floors are usually level, and existing walls are clean and dry, allowing fast installation of metal channels and boards.
Naeem sits in Jahra governorate, an expanding residential district of modern villas and apartments.
Ceilings in Naeem villas and apartments range from 2.7 to 3 metres, the standard height for straight partitions.
What the work covers
Marking out routes and services, then framing, boarding and full jointing to a paint-ready surface.
Layout and marking
Marking partition lines on floor and ceiling before any framing begins.
Galvanised steel frame
Fitting floor tracks and stud uprights at correct centres for rigidity.
Services routing
Coordinating electrical conduit and plumbing runs inside the partition before boarding.
Board fixing
Two board faces fixed to the frame with countersunk screws for a flat surface.
Taping and jointing
Fibre tape on every joint with multi-coat filler to prevent cracking.
Paint-ready finish
Sanding and surface treatment until the partition accepts primer and paint directly.
How it works.
First contact
Call or WhatsApp with a brief description of where the partitions are needed and why.
Site visit
We visit to measure, check services routing and confirm the right board specification.
Quotation
A detailed quote covering framing, board, jointing finish and any embedded services.
Installation
Setting out centrelines, fixing the frame, boarding both faces and building up joint coats.
Handover
Final sanding, plumb and flat check, then surface handed over ready for primer.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Gypsum partitions
Other services in Naeem
Questions about Gypsum partitions in Naeem
Call nowAre floors and existing walls in Naeem ready for new partitions?
Yes, concrete floors are usually level and walls are dry and clean, allowing direct installation of channels and boards without additional preparation.
How many gypsum board layers do you use in interior partitions?
We apply one layer of 12.5 mm gypsum board on each side of metal studs for standard interior partitions, with full joint taping and sanding ready for paint.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps