Gypsum-board room in Anjafa
Gypsum-board room installation in Anjafa serves the residential villas and apartment buildings with smaller units. We install galvanised steel frames and screw-fix the boards, embed services within the cavity, and finish the surface ready for paint.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Anjafa is a villa district and apartment complex area with varied architectural styles, mostly built three decades or more ago. Internal partitions in these buildings are often old stone walls or brick masonry, requiring partial demolition or space re-planning. A fully finished gypsum-board room here means setting the frame at a safe distance from the load-bearing wall, routing electrical, air-conditioning and sound insulation within the frame cavity before closing the boards.
Anjafa sits in Hawalli governorate, a residential district of older villas and apartment buildings.
The frame setback from the original structure is calculated to prevent cracking and moisture ingress.
What the build covers
Galvanised steel frame, screw-fixed boards, embedded services and a surface ready for paint.
Steel-stud frame
Galvanised runners and studs sized to the room height and layout.
Electrical and AC routing
Conduits and cables run through the frame before boards are fixed.
Board fixing
Boards screw-fixed to all walls and ceiling with correct perimeter gaps.
Door frame and openings
Door opening cut and framed with reinforced steel to carry the door frame.
Taping and jointing
Fibre tape and multiple compound coats on every joint for a flat surface.
Paint-ready surface
Light sanding and a final check before handover for painting.
How it works.
Contact and site visit
Call or WhatsApp us to arrange a site visit at your convenience.
Measurement and layout
We measure the space and mark service routes and the door position.
Frame installation
Galvanised runners and studs fixed to floor, slab and adjacent walls.
Services and boarding
Conduits and cables routed inside the frame before boards are screw-fixed.
Finishing and handover
Joints taped, surface levelled and room inspected before final handover.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Gypsum-board room
Other services in Anjafa
Questions about Gypsum-board room in Anjafa
Call nowHow do you fix gypsum board to an old stone wall?
We build a separate galvanised steel frame at least 5 cm away from the stone wall, then screw-fix the boards to the frame. This allows insulation and air flow between the new partition and the old wall.
Can electrical wiring and air-conditioning lines be hidden inside the gypsum-board wall?
Yes, we route wires and pipe within the steel frame cavity before boarding, with access points left safe for maintenance.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps