Distribution board installation in Ardhiya Industrial
Installing a properly rated distribution board in Ardhiya Industrial requires assessing high-load machinery and three-phase motors. We select large-capacity breakers and conductors, and run heavy-gauge supply cables from the main meter to the sub-board in the warehouse or factory.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Ardhiya Industrial is a zone for warehouses and small to medium factories with relatively large plots of 1,000 to 3,000 square metres, and most buildings have high ceilings and heavy electrical loads from ovens, compressors and motors. The main board is usually mounted near the three-phase input point and requires heavy copper conductors with large cross-sections, 16 to 120 square millimetres, to handle high currents. The board also needs additional protection devices against ground faults and sudden load spikes.
Ardhiya Industrial sits in Farwaniya governorate, a zone of warehouses and factories dedicated to light and medium industrial activities.
We use a three-phase main breaker rated 125 or 160 amperes per warehouse, with conductors run underground or in metal ducts.
What the installation covers
Load assessment, board mounting, breaker selection, circuit termination and labelling to a consistent standard
Load assessment
Calculating AC and appliance loads to size the board correctly
Breaker selection
Matching each breaker rating to its circuit's cable and load
Board mounting
Fixing the enclosure securely with all conduit entries sealed
Residual current protection
Fitting RCD breakers on wet areas, outdoor circuits and pools
Earth connections
Connecting earth conductors to every breaker and the main earth bar
Circuit labelling
Labelling every breaker with its room or load for easy future maintenance
How it works.
Call or message
Call or WhatsApp us to describe your building and board requirements
Site survey
Our engineer visits to count loads, assess existing cables and confirm board location
Quotation
We submit a detailed quote listing board spec, breaker types and installation method
Installation
We mount the enclosure, terminate all cables and fit breakers with full earthing
Testing and handover
We test each circuit under real load, label every breaker and hand over the board
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Distribution board installation
Other services in Ardhiya Industrial
Questions about Distribution board installation in Ardhiya Industrial
Call nowHow do you calculate the main board current for a small factory with heavy machinery?
We add the power rating of each machine or motor, usually shown on its nameplate, then apply a demand factor (typically 0.75 to 0.9) because not all machines run simultaneously. For example, motors totalling 50 kilowatts with a 0.8 demand factor give an actual load of 40 kilowatts, so we choose a breaker rated 75 or 100 amperes depending on voltage and phase.
Does a factory board need protection against ground faults and sudden surges?
Yes, we install residual current devices (RCD) at 30 milliampere sensitivity to protect against ground faults on motor and sensitive equipment circuits. We also use miniature circuit breakers (MCB) with fast-trip ratings to cut off when current spikes suddenly.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps