Apartment central AC in Kuwait - Sabah Al-Nasser

Apartment central AC in Sabah Al-Nasser

Central AC installation and balancing in Sabah Al-Nasser apartments includes load calculation based on orientation and exposure, duct routing, grille fitting and full commissioning. The system is handed over balanced and ready for operation.

  • Licensed company
  • Turnkey builds
  • Pay in instalments
  • All 6 governorates

What sets this area apart

Sabah Al-Nasser has modern apartments in five to eight-storey blocks on standard plots with open-plan layouts and relatively high ceilings. Solar exposure varies widely due to different plot orientations and street directions, creating uneven thermal loads between east and west-facing sides of the unit. AC ducts benefit from the higher ceilings for smooth horizontal runs, but we need precise balancing to match airflow to differing loads across rooms and zones.

Sabah Al-Nasser sits in Farwaniya governorate near the Sixth Ring Road.

We measure thermal load per room based on floor area and solar exposure before designing duct routes.

Back to Apartment central AC

See also: Central AC installation in Sabah Al-Nasser

What the installation covers - Apartment central AC

What the installation covers

Apartment AC handled from duct layout through grille fitting to a balanced, tested system.

  • Cooling load check

    Room-by-room heat load calculated before sizing the AC unit.

  • Duct runs and branches

    Main sheet-metal ducts and flexible branches run through the ceiling void.

  • Duct insulation

    All ducts insulated against condensation and heat gain inside ceiling voids.

  • Grilles and drain lines

    Supply and return grilles fitted, condensate drain line laid at correct slope.

  • Airflow balancing

    Dampers adjusted so each room receives its correct share of cooled air.

  • Testing and ceiling close

    System run-tested for cooling and airflow before gypsum ceiling is closed.

How it works.

  1. First contact

    Call or WhatsApp us with the apartment area and ceiling status.

  2. Site visit

    We visit to measure rooms, check the ceiling void and confirm the outdoor unit position.

  3. Design and quote

    Duct layout and load calculation prepared, then a detailed quote submitted.

  4. Installation

    Ducts run, unit and grilles installed, drain line laid, ceiling closed.

  5. Testing and handover

    System started, dampers balanced, airflow confirmed even before final handover.

Call now

Why one contractor beats four.

Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.

  1. Turnkey

    Shell and finishing with one company, from footings to keys.

  2. Pay in instalments

    Construction and finishing on instalments. Ask us for the details.

  3. Engineering supervision

    Architectural drawings and engineering supervision on site.

  4. After handover

    Maintenance contracts and a 24-hour emergency plumber.

Call now

A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.

What our clients say.

See all reviews on Google

Questions about Apartment central AC in Sabah Al-Nasser

Call now
Do east and west-facing rooms in the same apartment need different balancing?

Yes, morning and afternoon sun create different thermal loads. We calculate load per exposure and adjust balance dampers on east and west branches separately to maintain even comfort.

How long does airflow and pressure balancing take?

After all grilles and ducts are installed, we test pressure and flow in each room, which typically takes a few hours depending on apartment size and number of branches.

Have a plot, or a house to renovate?

Call or send a WhatsApp message and tell us about your project.

Licensed and registered in Kuwait.

Check us before you sign. This is our licence number and what it covers.

Find us on Google Maps
Licence no.2024/23054
  • Building construction
  • Building finishing
  • Renovation
  • Infrastructure works