Apartment central AC in Hateen
Central AC fitting and balancing in Hateen apartments requires precise area survey and duct layout before final finishes. We calculate the heat load for each room, then run pipes and ducts, and fit grilles balanced to the distances and bearing walls.
- Licensed company
- Turnkey builds
- Pay in instalments
- All 6 governorates
What sets this area apart
Hateen apartments are mostly residential units between 100 and 180 square metres, with separate bedrooms and open living areas, built across different eras from older blocks to newer ones. Each unit needs a central indoor unit location (air handler) near the main living space or corridor, with set clearance from ceilings for duct runs between rooms. Bearing walls and structural columns limit the duct routes, so we review the structural drawings before cutting any ceiling or wall opening.
Hateen lies in Hawalli governorate, a traditional residential district with buildings of varied height and age.
Most Hateen apartment ceilings are 2.7 to 3 metres high, which sets the maximum duct depth before final finishes.
What the installation covers
Apartment AC handled from duct layout through grille fitting to a balanced, tested system.
Cooling load check
Room-by-room heat load calculated before sizing the AC unit.
Duct runs and branches
Main sheet-metal ducts and flexible branches run through the ceiling void.
Duct insulation
All ducts insulated against condensation and heat gain inside ceiling voids.
Grilles and drain lines
Supply and return grilles fitted, condensate drain line laid at correct slope.
Airflow balancing
Dampers adjusted so each room receives its correct share of cooled air.
Testing and ceiling close
System run-tested for cooling and airflow before gypsum ceiling is closed.
How it works.
First contact
Call or WhatsApp us with the apartment area and ceiling status.
Site visit
We visit to measure rooms, check the ceiling void and confirm the outdoor unit position.
Design and quote
Duct layout and load calculation prepared, then a detailed quote submitted.
Installation
Ducts run, unit and grilles installed, drain line laid, ceiling closed.
Testing and handover
System started, dampers balanced, airflow confirmed even before final handover.
Why one contractor beats four.
Every extra contractor means another schedule and another excuse. With us, one company answers for all of it.
Turnkey
Shell and finishing with one company, from footings to keys.
Pay in instalments
Construction and finishing on instalments. Ask us for the details.
Engineering supervision
Architectural drawings and engineering supervision on site.
After handover
Maintenance contracts and a 24-hour emergency plumber.
A licensed Kuwaiti company for building construction, finishing, renovation and infrastructure works.
What our clients say.
See all reviews on GoogleExcellent
Taha Saad
Google review
Excellent
Ali Nadi
Google review
More areas for Apartment central AC
Other services in Hateen
Questions about Apartment central AC in Hateen
Call nowHow do you plan the duct route in an older apartment with many bearing walls?
We use structural drawings to locate bearing walls and columns, then select duct paths through safe zones. We may need to adjust the indoor unit location in coordination with the owner and site engineer.
Do you work with low-ceiling and tight-space apartments?
Yes, we use flat or slim-profile ducts, fit grilles on interior walls, and balance airflow according to available space.
Licensed and registered in Kuwait.
Check us before you sign. This is our licence number and what it covers.
Find us on Google Maps